Wilco Offroad

HITCHGATE SOLO - (Standard-Hi-Clearance-XL)

Name: HITCHGATE SOLO - (Standard-Hi-Clearance-XL)
Brand: Wilco Offroad
SKU: WILC-UHG32130
Price: 1113.8 USD
Availability: InStock

SKU:WILC-UHG32130

$1,113.80 USD

Sale Sold out

Shipping calculated at checkout.

Swing Hitch Option No Hitch Add Hitch (+$89.30)

Size Standard Standard Hi-Clearance XL

Product variants

Quantity

HITCHGATE™ SOLO

When it comes to strength and weight, the Hitchgate™ Solo packs a powerful punch. With the same tow rating as its bigger siblings and the capacity to carry a 35-inch tire (on a mid-sized truck), the Solo is ready for whatever the adventure calls for. The Hitchgate Solo was designed to go lean and low on the next adventure while still being prepared. The Hitchgate Solo’s reduced weight is perfect for those looking to carry a 35-inch (on a mid-size vehicle) or smaller spare tire, and Rotopax fuel cans.

Not only is weight reduced, but so is the overall height of the horizontal support arm which sits 4″ lower than a Hitchgate Classic or MAX. By relocating the truck mount at the *same level* as the vehicle’s receiver hitch, the Solo is uniquely designed to accommodate vehicles that have a tight clearance between the rear hatch/door and the receiver (Ex: Sprinter, Renegade, Tahoe, Grand Cherokee). The Hitchgate Solo is also a phenomenal candidate for Subaru (See Fitment section below) and any vehicle where every pound counts.

The Hitchgate Solo spare tire carrier universally fits on almost all vehicles with a Class III/2″ hitch receiver. This swing-away, spare tire carrier mounts to any 2-inch, Class III hitch receiver and is perfect for SUVs, Jeeps, vans, and pickups. This tough tire carrier secures up to a 35-inch spare tire (on mid-sized vehicles) while maintaining ground clearance with minimal change in departure angles when driving off-road. Release a single latch pin and it opens wide for full access to the vehicle’s cargo space. The Hitchgate Solo line is tow-rated at 7,500 lbs (max trailer weight) and 750 lbs (tongue weight). *These limits may be more than your vehicle’s capacity. ALWAYS stay within the limits of your vehicles tow/tongue ratings)* The tire carrier is rated for 150lbs of total weight. If your tire and wheel reach that limit, you won’t be able to carry any fuel or tools…look towards the Hitchgate Classic or Max for more capacity.

*This is a universal part.

3 Solo Models to choose from:

Hitchgate Solo Standard UHG32130 sits at hitch height and is 25″ wide on the support arm. If your hitch is near your rear hatch, probably a good choice.
Hitchgate Solo *High Clearance* UHG33187 is a Solo Standard with the horizontal support arm moved 4″ higher. If your hitch is under your bumper/body, probably a good choice.
Hitchgate SoloXL UHG32206 is a mirror image of the Solo but is 5″ wider. This allows full-size trucks to carry up to a 35″ tire + and allows full-size vans to open their doors past 90 degrees.

MEASUREMENTS & FITMENT:

Solo Standard–> 53lbs Almost all compact and mid-sized trucks, SUVs, and cars with tires up to 35″. Full-sized trucks, SUVs, and cars with tires smaller than 33″. [25″ wide from hitch to pivot bolt, 3.5″ minimum depth from 1st hitch pin to the back of support arm. 4.5″ to the next hitch pinhole. Solo sits at hitch height, rising only 2.5″ above the receiver.]
Solo High Clearance–> 54lbs Almost all compact and mid-sized trucks, SUVs, and cars with tires up to 35″. Full-sized trucks, SUVs, and cars with tires smaller than 33″. [25″ wide from hitch to pivot bolt, 3.5″ minimum depth from 1st hitch pin to the back of support arm. 4.5″ to the next hitch pinhole. Solo High Clearance sits 4″ above hitch height, rising 6.5″ above the receiver.]
Solo XL–> 56lbs Full-sized trucks, SUVs, and cars with tires larger than 35″ OR those who need the tire to swing further away from the vehicle. [ 30″ wide from hitch to pivot bolt, 3.5″ minimum depth from 1st hitch pin to the back of support arm. 4.5″ to the next hitch pinhole. SoloXL sits at hitch height, rising only 2.5″ above the receiver.]
Fitment Calculator–> Multiply the width of the Solo arm you’re interested in x2, then subtract half the diameter of your tire…the sum will give you an estimate of how far away your tire will sit from your hitch and help you choose the Solo that’s right for yours. Solo Standard = 25″, Solo High Clearance = 25″, SoloXL = 30″

Swinging Hitch Option:

Need to swing a bike rack, or hitch-mounted cargo basket out with your Tire? The Hitchgate now has an optional secondary swinging hitch to allow just that. The Solo will still come with a standard stationary receiver designated for towing.

***Bike rack may require hitch extension depending on tire width and bike rack’s tongue length.***

View full details

What's in the Box

Warranty Information

RalliTEK BRANDED PRODUCTS LIFETIME WARRANTY

RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or info@rallitek.com to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

NOTE: This warranty is only available within the United States or Canada

This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.

MANUFACTURER WARRANTIES (FOR NON-RALLITEK BRANDED PRODUCTS)

Non-RalliTEK branded products do not have any written or implied warranties. Products on RalliTEK.com are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

EXCEPT AS STATED OTHERWISE IN THIS WARRANTY, RalliTEK MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.