Skip to product information
1 of 5

RalliTEK

1/2" Front Lift Kit Spacers - Fits 2002-2007 Subaru WRX & STI

1/2" Front Lift Kit Spacers - Fits 2002-2007 Subaru WRX & STI

SKU:RTEK-830-414-000

Regular price $58.33 USD
Regular price Sale price $58.33 USD
Sale Sold out
Shipping calculated at checkout.
  • LIFETIME GUARANTEE
  • USA MADE

These HDPE (High-density polyethylene) spacers are installed right over your factory strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.

Includes: 

  • 2 x 1/2" Spacers & hardware.

New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

In comparison to aluminum spacers, our HDPE material is lightweight and not prone to additional NVH (Noise, Vibration, and Harshness), unlike typical aluminum spacers that transfer straight to the chassis. HDPE or high-density polyurethane has a compression yield strength of 20Mpa or 2900 pounds per square inch. 

Install Difficulty

See Install Difficulty Guide for more info

Est. Install Time -

3 Hours
View full details

Collapsible content

What's in the Box

x2 RalliTEK Front Lift Spacers
x1 Hardware Kit

Warranty Information

RalliTEK BRANDED PRODUCTS LIFETIME WARRANTY

RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or info@rallitek.com to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

      NOTE: This warranty is only available within the United States or Canada

  • This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
  • This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.

MANUFACTURER WARRANTIES (FOR NON-RALLITEK BRANDED PRODUCTS)

Non-RalliTEK branded products do not have any written or implied warranties. Products on RalliTEK.com are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

EXCEPT AS STATED OTHERWISE IN THIS WARRANTY, RalliTEK MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.

Installation Instructions

Applications

Subaru Impreza WRX 2002-2007
Subaru Impreza WRX STI 2004-2007

Customer Reviews

Based on 4 reviews
50%
(2)
0%
(0)
50%
(2)
0%
(0)
0%
(0)
B
Brian
Should be made of aluminum

Install was relatively easy. Did not need to disassemble the strut, just used a ball joint tool to pop the old studs out. However, I've had to re-torque the top mounting nuts to 23 ft-lbs several times as the plastic material seems to compress and loosen the hardware to about 10 ft-lbs.

Hi there, thank you for your review and for choosing our 1/2' front lift kit spacers for your Subaru. We appreciate your feedback and are glad to hear that installation was relatively easy for you. We apologize for any inconvenience caused by the plastic material compressing and causing the hardware to loosen. We will definitely take this into consideration for future improvements. If you have any further concerns or questions, please don't hesitate to reach out to us. Thank you again for your support.

A
Aaron T.
Good quality

The spacers are good. Taking apart the strut assembly is a real pain to install them. I have not installed them because my strut mount was loose after re-assembly.

h
htimsdekim
These spacers do increase height by 1/2"

As advertised they increase the height 1/2". Installation is fairly straight forward and not too complicated. The only problem is being able to hold the bolt whilst tightening the nut. On one of the 3 bolts needed to mount the strut hat I needed to use a 6mm stubby hex to hold the bolt while tightening the nut and It was very difficult to make this happen. Customer support stated that the spacers had nuts recessed up in 'em, nah they did not

M
Michael N.
20k miles later and going strong

Put these in my 05 Forester with 255k miles. Very good springs!