RalliTEK

1/2" Rear Trail Springs - Fits 19-24 Subaru Forester

SKU: RTEK-830-921-290 ISBN: RTEK-830-921-290
Price: $233.31

RalliTEK springs are the most advanced springs available for Subarus. Our exclusive technology dramatically increases the vehicle's off-road performance while increasing the ability to carry more weight or added accessories.

Read More
Lifetime WarrantyMade In The USA

Fitment guaranteed for USDM models only.
Non-USDM vehicle owners, please contact us to check compatibility.
  • Estimated lift: 1/2"
  • Rear Spring Rate: 290 lb/in 
  • 20% stiffer than OEM
  • Finish - Blue Powdercoat W/ Zinc Enriched Primer
  • Material - High Chromium Spring Steel
  • Subframe Drop Required - No
  • Additional Parts Needed - No
  • Manufactured In - USA
  • Warranty - Lifetime Warranty

2 - RalliTEK Rear Sport Springs

Estimated DIY Install Time | 3 Hours

Install Difficulty |

Proposition 65

WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands.

For more information, see: www.P65Warnings.ca.gov/motor-vehicle-parts

Off-Road Use Only

This product is intended for off-road use only, and installation and operation are at the vehicle owner's discretion and responsibility in accordance with local state/federal laws. Click Here For More Info.

1/2" Rear Trail Springs - Fits 19-24 Subaru Forester

RalliTEK rear lift coil springs feature proprietary technology that greatly enhances the performance in any driving condition for the Subaru Forester. Our dual-rate linear suspension springs will provide much needed height and ground clearance, along with the ability to fit larger more aggressive off-road tires. Our lift springs are the perfect combination of off-road performance with on-road.

These Subaru Forester lift springs improve off-road handling and predictability while maintaining Subaru's plush on-road ride quality. As a result of installing RalliTEK lift springs, larger tires can be fitted for enhanced stability in inclement weather or on difficult terrains. Our springs are equally at home in the hills, on the overland trail, in the snow, or on the interstates.

  • Estimated lift: 1/2"
  • More responsive handling and turn in
  • Increased approach and departure angles
  • Extremely improved off-road performance
  • Maintains factory on-road ride quality
  • Increases ability to carry more weight on the vehicle
  • Spring rate: 290 lb/in 
  • 18-20% stiffer than OEM
  • Lifetime warranty
  • Sold in pairs
  • Made in the USA
  • Visit our Tire Sizing Chart 

RalliTEK recommends performing an alignment anytime suspension or other steering components are changed or replaced.

Want a completed Subaru lift kit on Bilstein shocks? See them here.

Still have some questions about parts for your Subaru Forester? Get in touch via live chat or call us now at 503-619-0055.

  • 5 stars: 5 (83%)
  • 4 stars: 0 (0%)
  • 3 stars: 1 (17%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
Some of the reviews shown are from related products the merchant grouped with this one.
D
Den
Lifting without compromise

Installed with stock strut on JDM 2019 Forester.

Personally felt that vehicle rolls lessen during drive despite the height increase. A well balance springs without compromising comfort on road.

Front gain ~2cm
Rear gain ~ 1cm

J
JM (.
Trail Springs (0-200LBS)
Tightens the ride.

As above, tightens the ride up to what Subaru SHOULD be oem.

Fit and finish is good.

Install is as expected.

Shipping was fast, but expensive.

However, only about 5mm unladen increase in height (measured) on the rear.
Noticeable in the front.

J
John G.
Overload Springs (200+ LBS)
Loose that Soggy Fozzy!

Notice when you load more than a jacket in the back of your subi or more than just you in the vehicle, it sags and handles different. These springs not only eliminate that, bonus feature, the vehicle handles, turns and feels great. Very taught, sure footed, not harsh best describes it. The springs them selves, physical appearance snd fitment, top class quality. Handles my mtb, rack, gear perfectly.

J
Jakkrawarn S.
Just a perfect choice to lift my Forester

I have been looking for the way to "slightly" lift my 2019 2.0L Forester that should:
- Involve little or no modifications
- Still fit with stock/OE struts
- Improve overall ride quality
- Give more confidence when tacking moderate offroads, and floods in rainy seasons
- Last long and require no additional maintenance
- Reasonably priced

And these Made-in-USA springs tick all boxes.

Worth the 2-month wait time for int'l shipping (and customs clearance) to Thailand.

Thanks for the review!

b
brad b.
19+ forester 1/2" rear springs

Installed with wilderness shocks. Ride is great.

E
Eli D.
👍👍👍👍

These springs are great! We had loaded up the Forester for a family trip, stuffed the trunk and backseat along with 2 kids in the back, 2 kayaks on the roof and 4 bikes on the back. The OE springs could not handle it and we bounced all the way from NJ to MD and back to NJ. I knew I was going to be buying even prior to that trip but while we were there I ordered these and installed them as soon as we got back and what an amazing difference. No more sagging and bouncing when loaded up👍👍. I was expecting a harsher ride with stiffer springs especially when it's not loaded up but the ride quality is amazing and smooth with better handling and perfect for the little off roading I do. We are probably going to be up sizing to an Ascent and will definitely be making this the first upgrade! Thanks for the quality products Rallitek!

l
lawrence

Hi, I am currently have the B8 shocks with stock springs setup on my forester. The rear sag really put my head in. I carry 1 adult in the back seat plus 40 kg tools in the trunk quite often. Thinking about upgrading the rear springs. Is it better that i get overload than sport springs?

RalliTEK

If you do not plan to add anymore weight than you have described, I would recommend our Sport Springs for your application. These will be 20% stiffer than OEM and if you do not plan on doing front springs, the rake provided will be enough to eliminate the sag you have mentioned. We would always recommed matching front springs with rear springs.

D
Den

Hi ,
can this fit into Subaru Forester Sk? I from Singapore which is a Right Hand Drive vehicle.

RalliTEK

It is highly possible it will work but unfortunatley we cannot guarantee fitment as we can only test on USDM models.

Lifetime Warranty

Designed | Assembled | Made In The USA

Rallitek Subaru Performance 25th Anniversary logo with blue and black design

Over 25 Years Building Subaru Parts | EST.2001