These springs do wonders for the handling and ride quality. No more bottoming out on speed bumps and dips on the interstate. These are great for those that like to carry passengers and/or stuff in the back. I wish I didn’t wait so long to get these!

Put them on my 2005 along with 3/4" strut spacers all around. The ride is firmer, the wallowing and bottoming out is gone. Turns in wonderfully and looks better with the butt lift.

These should have been the factory springs. The ride isn't noticeably rougher than stock, but the improvement carrying cargo or passengers is. No more hittingbthe bumpstops when fully loaded. I should have done this years ago.

Handles like it should now.i used bilstein b6 from legacy gt with 2 inch spacers because the shocks are 2 inches shorter to make it stock outback height.the KYBs felt blowed new and I was pissed that b6s were not offered for the outback so I got a whole set of used spec spec b B6 bilsteins for 150 bucks plus 350 dollars shipping and am happy now.

Perfect replacement for the stock

Just like the title says, get these springs! For your Outback, for your Crosstrek, whatever the car, get these! The ride is fantastic, and the match with the KYB is perfect!

The stock Subaru suspension skips/ jumps if you're in a turn and hit a bump. With the new setup, there is no disruption, giving you confidence. Worth every penny!

Ride is nice fells like factory springs but handles way more weight.

I purchased these for a stiffer rear suspension after my Outbacks suspension started bouncing around on rough highways. The strut was the real issue but I never liked the saggy rear of the outback and always felt the rear kinda needed stiffened when cornering.

I built these up on kyb Xcel g struts from scratch and did find an issue with this. The spring is thicker than the OEM coil. This makes fitting the KYB strut covers and bellows not fit. The OEM Subaru outback covers do fit but they aren't as nice and there isn't a listed bellow that's OEM for the rear. Some Amazon shopping got me what I needed. Really this is an issue on kybs side for making their strut covers a little too large compared to OEM.

The increased height looks nice but I will warn you these springs are stronger and longer so you will need to work to get them on your knuckle. The bolt line will sit nearly and inch below your knuckle when installing so you will need to compress it until you get the bolt into the knuckle and struts.

Got 1" Rear lifted overload Springs for my 2002 Subaru OutBack 3.0 to help out with the sagging ass of my Subaru. I have a lot of weight in my car and these overload springs are exactly what I needed. My car has never been so smooth before. Thank you Rallitek.

These springs are what the car should have shipped with from the factory. The ride is tightened, rough pavement isn't harsh and the car moves around much less than OEM springs. A worthwhile upgrade.

3/8" Rear Overload Springs - Fits 2005-2009 Subaru Outback

I used these springs along with 3/4" strut spacers from another vendor. The car sits perfectly, back slightly higher and no longer bottoms out over bumps. I matched the springs with 2004 KYB struts in the rear and stock KYB front strut/spring combos.
The ride is nice. If you go higher you need the more expensive chassis spacers of which I didn't want to spend the money. Would recommend.

Challenging to install due to the stiffness, 100 percent worth the effort! Wanted rear springs stiffer to compensate for deleting my sway bars and extra lift to help its saggy butt. Plan on ordering the fronts soon.

RalliTEK 0.5" Rear Lift Overload Springs - Fits Subaru Baja 2003

My outback appreciate these new springs, on holidays was loaded full without issues.

Have been driving on these for over a year and they really make the ride better on and off road! Customer service is top notch as well! Thank you Rallitek!