RalliTEK

Lifted HD Adjustable Front Endlinks - Fits 19-24 Subaru Forester & Wilderness

SKU: RTEK-113708 ISBN: 1
$156.35
SALE! - 10% OFF use CODE: BF2024

Product Use Disclaimer - By Purchasing This Product You Agree to this Linked Disclaimer

Swaybar Quick Disconnects
Lifetime Guarantee Assembled in U.S.A

RalliTEK designed these direct replacement extended/adjustable front HD end links specifically for lifted applications. Featuring an anodized aluminum turnbuckle with lock nuts for easy length adjustment. Our HD end links help reduce suspension slop and increase side-to-side response. These are compatible with factory or aftermarket sway bars. 

FEATURES:

  • 30% thicker material than the factory links
  • Outlast and outperform OEM end links
  • Extended length optimized for lifted applications
  • Designed for OEM ride height to 3" Lift Vehicles
  • Sold As A Pair

RalliTEK designed a direct replacement HD endlink that will work with factory or aftermarket sway bars.

 RalliTEK HD heavy-duty endlinks are designed to outlast and outperform your factory sway bar endlinks. Featuring a polished steel ball and socket, (factory endlinks utilize a plastic socket to ensure smooth operation but at the cost of strength)

 RalliTEK HD endlinks features, a material 30% more rigid than the factory, steel alloy construction, polished steel ball socket(not plastic like factory), and adjustable length to dial in the perfect bar angle at any ride height. These are a perfect addition when upgrading your sway bars or when changing your ride height.

*This Product Contains Two Endlinks*

Install Difficulty

Click Here To See Install Difficulty Guide For More Info

Est. Install Time -

2 Hours

This product is designed for off-road use only. Use of this product is at the buyer's own risk. - Click Here For Info

x2 RalliTEK Adjustable Swaybar Endlinks

If Selected:
x2 Swaybar Quick Disconnects
x2 Swaybar Disconnect Strap System
x2 Swaybar Disconnect Strap Mount

Compatible With:
Subaru Forester - 2019
Subaru Forester - 2020
Subaru Forester - 2021
Subaru Forester - 2022
Subaru Forester - 2023
Subaru Forester - 2024
Subaru Forester Wilderness - 2022
Subaru Forester Wilderness - 2023
Subaru Forester Wilderness - 2024




Customer Reviews

Based on 5 reviews
60%
(3)
20%
(1)
0%
(0)
0%
(0)
20%
(1)
L
Lee E.
Boot leaked only after 500 miles

I added these to my 2019 Subaru Forester when I put a 2inch lift on. After a week I started to hear a pop. At the 500 mile mark, when I went back to re-torque the lift, I noticed that the boot on the top of the passenger’s side was leaking. It’s been sitting until I get a new part. Probably not going to replace with this product.

Hello Lee,

We've seen this happen before when the endlink is overgreased. If you put too much grease in the joint then the boot will be full of grease and as soon as that joint goes to articulate the grease has too go somewhere so the boot pops open.

This is deemed install error when adding grease to our greasable fitting and the boot should not be full of grease and only the joint itself should have grease in it. I sent you an email reaching out on this. We have a lifetime warranty on our products. We all make mistakes and would be more than willing to replace them as a courtesy to you.

w
wayne w.
Adjustable end links

First pair failed. Rallitek warrenteed them no questions asked. In the mean time they improved them with grease fittings.

A
Amir S.
The product works great

it gives a much bettter traction on the groun. for connect and and disconnect the link you have to be on even surface.

H
Huy C.

Lifted HD Adjustable Front Endlinks - Fits 19-24 Subaru Forester & Wilderness

J
Jaxon D.
Great product but I wish instructions were a little more clear

There is absolutely nothing wrong with these end links, and I highly recommend them! Wrapping my head around how the suspension works on my 2021 Forester was a different story. The only reason I am leaving a 4-star and not a 5-star review is that the installation instructions don't explain that the end link actually needs to be shorter, NOT longer, after a 2" lift.

If you buy these, here is the easiest way I found to install them.
1. Jack up the front end and remove tires
2. install each end link (keep the length at about 11") but don't tighten the lock nuts all the way yet.
3. Put the wheels back on the vehicle and take it off the jack stands
4. Drive the vehicle forward and backward, and turn your wheels in both directions a few times as well to get the suspension to settle
5. With the car on the ground and wheels straight, adjust the turnbuckle on each end link until you find the middle point of least resistance (make sure you check each one a couple of times)
6. Once you're happy with where they're at, hand-tighten the lock nuts.
7. Jack up the front end again and remove the wheels.
8. Torque down the lock nuts.
9. Torque down the end links again to be sure.
10. Grease the ball joints up with red n tacky #2
11. Put the wheels on and drop the vehicle.

I found this video really helpful, but don't worry about weighing down the driver's seat for corner balancing (unless you lifted your forester to race it...?). He only installs one end link, but the steps are the same for installing two end links, just do everything he does to both end links. Here's the link: https://www.youtube.com/watch?v=mR765KCsLoU