AEM DryFlow Air Filter - 9" Element
AEM DryFlow Air Filter - 9" Element
These AEM Dry Flow filters are some of the best filters we at RalliTEK have ever used. We have seen significant gains from just replacing the filter on many cars with just about any intake system.
- Designed to increase horsepower and throttle response
- AEM Air Filters are cleanable and guaranteed for the life of your vehicle
- Captures up to 99% of harmful contaminants
- Outstanding performance even in dusty racing conditions
- Manufactured in the USA
- Does not require oil
- Will NOT void vehicle warranty
AEM DRYFLOW air filters do not use oil so there is no chance of over-oiling your filter which takes the guesswork out of servicing.
Easy to Clean
The DRYFLOW filter uses environmentally friendly, mild, all-purpose cleaner. Simple cleaning instructions. Under extremely dusty/dirty conditions, DRYFLOW filters can be knocked a few times to remove excess dirt off of the filter pleats. DRYFLOW filter media is so durable that it can withstand almost unlimited cleanings and also resists water absorption. Warranty-Safe Filtration
DRYFLOW air filters will not void your warranty.
Sheds Dirt Under Vibration
AEM?s unique non-woven filter media does not require oil to filter and trap dirt and contaminants, and as a result an open air filter actually sheds dirt under engine vibration, unlike cotton-gauze which holds on to contaminants until you clean the filter.
Air Flow Capabilities
Every DRYFLOW air filter is engineered to exceed the normal flow capacities of the engine it is required for when clean. For example, a typical naturally aspirated 2.0L engine requires 253 CFM of flow. The filter we manufacture for a 2.0L Acura RSX Type-S (21-204DK) delivers up to 565 CFM of flow when clean. You get great flow with DRYFLOW, in addition to outstanding filtration and excellent dust holding capacity.
Many of our competitors emphasize flow as a primary means of power production in air intakes. While flow is certainly an important part of the equation, we find that tuning the inlet to work with the harmonics of the engine produces the best power gains. We address flow in the sense that the engine requires a given amount of flow, so we calculate our filter size to exceed this flow requirement by a wide margin to accommodate potential future engine modifications. This allows us to retain a high level of filtration efficiency and still exceed the flow requirements of an engine. Our filters will trap more dirt, and consequently extend the life of the rings and seals in your engine.
By designing our DRYFLOW filters to exceed the flow requirements for the size of the engine that we designed the intake for, it allows us to do two things. The first is that it allows you to add modifications that increase flow demand without exceeding the flow capabilities of the filter. Second, it extends the filter?s service cycle (you don?t have to clean it as often) because it can trap more dirt without sacrificing flow. Rest assured that we have taken flow into account for all of our intake designs and our DRYFLOW filters will deliver more than adequate flow for your vehicle.
** All flow testing was conducted by AEM on a Superflow 1060 Super Bench flow bench. Results are single filter comparisons and will vary for other part numbers.
What's in the Box
RalliTEK BRANDED PRODUCTS LIFETIME WARRANTY
RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.
If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.
For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or email@example.com to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.
NOTThis warranty is only available within the United States or Canada
- This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
- This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.
The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.
MANUFACTURER WARRANTIES (FOR NON-RALLITEK BRANDED PRODUCTS)
Non-RalliTEK branded products do not have any written or implied warranties. Products on RalliTEK.com are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.
There is no warranty on high-performance or race-related parts due to the nature of usage.
No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.
EXCEPT AS STATED OTHERWISE IN THIS WARRANTY, RalliTEK MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.
- Choosing a selection results in a full page refresh.
Net Orders Checkout