Skip to product information
1 of 6

RalliTEK

1" Rear Lift Kit Spacers - Fits 2000-2009 Subaru Outback & Legacy

1" Rear Lift Kit Spacers - Fits 2000-2009 Subaru Outback & Legacy

SKU:RTEK-830-524-001

Regular price $115.50 USD
Regular price Sale price $115.50 USD
Sale Sold out
Shipping calculated at checkout.
  • LIFETIME GUARANTEE
  • USA MADE

These HDPE (High-density polyethylene) spacers install right over your strut hat. Great for adding more lift to a vehicle's original/aftermarket equipment or helping level out your fender gap.

 

Includes: 

  • 2 x 1" Spacers & hardware.

New strut mount hardware included! Class 12.9 bolts and class 8 to 10 nuts.

In comparison to aluminum spacers, our HDPE material is light-weight and not prone to additional NVH (Noise, Vibration, and Harshness), unlike typical aluminum spacers which transfer straight to the chassis. HDPE or high-density polyurethane has a compression yield strength of 20Mpa or 2900 pounds per square inch. 

 

Does not fit Spec. B

Install Difficulty

See Install Difficulty Guide for more info

Est. Install Time -

3 Hours
View full details

Collapsible content

What's in the Box

x2 Rear Lift Spacers
x1 Hardware Kit

Warranty Information

RalliTEK BRANDED PRODUCTS LIFETIME WARRANTY

RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or info@rallitek.com to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

      NOTE: This warranty is only available within the United States or Canada

  • This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
  • This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.

MANUFACTURER WARRANTIES (FOR NON-RALLITEK BRANDED PRODUCTS)

Non-RalliTEK branded products do not have any written or implied warranties. Products on RalliTEK.com are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

EXCEPT AS STATED OTHERWISE IN THIS WARRANTY, RalliTEK MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.

Installation Instructions

Applications

Subaru Legacy - 2000
Subaru Legacy - 2001
Subaru Legacy - 2002
Subaru Legacy - 2003
Subaru Legacy - 2004
Subaru Legacy - 2005
Subaru Legacy - 2006
Subaru Legacy - 2007
Subaru Legacy - 2008
Subaru Legacy - 2009
Subaru Outback - 2000
Subaru Outback - 2001
Subaru Outback - 2002
Subaru Outback - 2003
Subaru Outback - 2004
Subaru Outback - 2005
Subaru Outback - 2006
Subaru Outback - 2007
Subaru Outback - 2008
Subaru Outback - 2009

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Subaru O.
Five stars - However…

Product (rear lift spacers) came fast and as advertised. Instructions were a bit basic. Luckily I had the service manual for my Subaru Outback. Suggestion: would it kill you guys to put torque values in the instructions?
Otherwise the stance has been restored on my Soobie.

Thank you for your feedback and five-star review! We're glad to hear that the product arrived quickly and as advertised. We apologize for any inconvenience with the instructions and will definitely consider your suggestion to include torque values in the future. We're happy to hear that the stance on your Subaru Outback has been restored. Thank you for choosing our product. Happy driving!

A
Aidan M.
Ideal level kit

Great fix for the iconic Subaru rear end sag problem. I'm now driving the only Legacy in town that doesn't look like a dog dragging its butt on the carpet!

C
Christopher F.
Fits 2007 GT spec.B with minor modifications

Fits GT spec.B with bilstein shocks. Required minor cutting of top hat to clear the top mounting studs. Otherwise, works great. My alignment shop said it was very easy to align.

Use a pry bar to push down the lower control arm during reassembly.

Would recommend this product! Now my car fits 215/55/R17. No lift in the front, only 1” in the back. No rubbing.

N
Noel s.
Hell yes

One of the best efficiency upgrades you can do to the car