Skip to product information
1 of 4


Bilstein B8 Suspension Lift Kit - Fits 2013-2017 Subaru Crosstrek

Bilstein B8 Suspension Lift Kit - Fits 2013-2017 Subaru Crosstrek


Regular price $1,895.00 USD
Regular price Sale price $1,895.00 USD
Sale Sold out
Shipping calculated at checkout.
Rear Spring Rate

RalliTEK's Crosstrek Lift Springs and Bilstein B8 Shocks are the ultimate duo to take your Subaru Crosstrek's off-road capabilities to new levels. When we set out to develop a suspension lift for the Subaru Crosstrek, we wanted to create a product that dominates anything else on the market. Allowing you to install aggressive off-road tires for better performance in inclement conditions and off-road.

RalliTEK lift kits take Subaru's already epic platform and transform it into an off-road powerhouse. These lift kits are the most advanced suspension systems available for Subarus. Our exclusive spring technology dramatically increases the vehicle's performance off-road while increasing the ability to carry more weight or added accessories.

  • Lift Height - 1.5"
  • More responsive handling and turn-in
  • Increased approach & departure angles
  • Extremely improved off-road performance
  • Keeps factory on-road ride quality
  • Increases ability to carry more weight on the vehicle
  • No drilling or cutting, complete bolt-on kit
  • Lifetime warranty (Springs Only) 
  • Sold in pairs
  • Visit our Tire Sizing Chart for Tire Recommendations

RalliTEK recommends performing an alignment anytime suspension or other steering components are changed or replaced.

Install Difficulty

See Install Difficulty Guide for more info

Est. Install Time -

4 Hours
View full details

Collapsible content

What's in the Box

x2 Front Bilstein B8 Strut Assemblies
x2 Rear Bilstein B8 Strut Assemblies
x1 Subframe Drop Kit

Warranty Information


RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

      NOTE: This warranty is only available within the United States or Canada

  • This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
  • This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.


Non-RalliTEK branded products do not have any written or implied warranties. Products on are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.


Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.

Installation Instructions


2013 Subaru Crosstrek
2014 Subaru Crosstrek
2015 Subaru Crosstrek
2016 Subaru Crosstrek
2017 Subaru Crosstrek

Customer Reviews

Based on 1 review
Owen B.
Solid suspension and great ground clearance

I lifted my 2016 Impreza in July of last year a month before moving to Alaska, I went with Flatout Suspension GR Lite coilovers and 350lbs overload springs and managed about 2.5" of lift over stock. Only 10 months and 10K miles later 3/4 coilovers blew out their seals and I was bouncing all over the road and ruining other suspension components due to the sagging suspension. I decided to go a different direction and pick something that would hopefully be more robust and offer more lift. This is for a 1st gen Crosstrek so the 1.5" lift translates to a 3.5" lift on an Impreza. Everything shipped quickly and was well packaged(shipping cost to Alaska was brutal) Install is straightforward and took myself and a friend a day to do along with new Crosstrek CV axles and Crosstrek LCAs. I'm very happy with the height and the ride quality, I'll update over time as hopefully these will last me much longer than my previous setup