RalliTEK

Bilstein B8 Suspension Lift Kit - Fits 2014-2018 Subaru Forester

SKU: RTEK-100537 ISBN: 1
$1,913.95
Rear Spring Rate
Lifetime Guarantee Assembled in U.S.A
 

RalliTEK's Forester Lift Springs and Bilstein B8 Shocks are the ultimate duo to take your Subaru Forester's off-road capabilities to new levels. When we set out to develop a suspension lift for the Subaru Forester, we wanted to create a product that dominates anything else on the market. This product allows you to install aggressive off-road tires for better performance in inclement conditions and off-road.

RalliTEK lift kits transform Subaru's epic platform into an off-road powerhouse. These lift kits are the most advanced suspension systems available for Subaru. Our exclusive spring technology dramatically increases the vehicle's performance off-road while increasing its ability to carry more weight or add accessories.

  • Lift Height - 1.5"
  • More responsive handling and turn-in
  • Increased approach & departure angles
  • Extremely improved off-road performance
  • Keeps factory on-road ride quality
  • Increases ability to carry more weight on the vehicle
  • No drilling or cutting, complete bolt-on kit
  • Lifetime warranty
  • Sold in pairs
  • Visit our Tire Sizing Chart for Tire Recommendations

RalliTEK recommends performing an alignment anytime suspension or other steering components are changed or replaced.

Need Install? We do installs right here at RallITEK HQ and also have hundereds of dealers all over the country. Click here to learn more.

Click Here To See Install Difficulty Guide For More Info

EST. Install Time -

4 Hours

This product is designed for off-road use only. Use of this product is at the buyer's own risk. - Click Here For Info

x2 Front Bilstein B8 Strut Assemblies
x2 Rear Bilstein B8 Strut Assemblies
x1 Subframe Drop Kit

Refer to OEM installtion procedure

Compatible with:
2014 Subaru Forester
2015 Subaru Forester
2016 Subaru Forester
2017 Subaru Forester
2018 Subaru Forester

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
Byron B.
Just the right amount of lift.

This kit is stellar, it comes with everything you need to do the job. It even came with lower strut camber bolts for the front, even though I didn't end up needing them.
My starting measurements were 31" in the rear, 30" in the front (ground to fender arch)
After the lift, I'm sitting at 33" in the rear, and 32.5" in the front. I'm sure the springs will settle a bit in the front a bit.
I opted for the Overload springs in the rear; unloaded the vehicle feels a bit truck-like, but with my fully loaded bike rack on and other cargo, the stiffness dissipates.
The on road ride characteristics are sporty. The turn in is sharp and responsive, and the brake and shift dive have reduced significantly.
The subframe spacer kit is the Bilstein supplied kit, and drops exactly 1", which is a great balance in my opinion– it's just enough to give additional differential clearance. It comes with rear brake line mount extenders too.
I torqued all the subframe bolts in the air, and let the car settle before torquing all the suspension knuckle bolts and shock mounts, and was able to keep my alignment pretty close. The rear camber is just a touch negative like stock.
The front struts were able to achieve 0° camber by almost maxing out the stock camber bolts towards positive camber, which is a neat because with a lot of spacer lifts you usually have too much positive camber with a max negative setting. So kudos to Bilstein for the right geometry adjustment.
All in all, this is a great kit. All the details are attended to as far as spring insulators and hardware. Excited to get this thing in the dirt!