Skip to product information
1 of 1

Whiteline

Whiteline Front Control Arm Bushings - WRX 2002-2007 - STI 2004-2007 - Legacy 2000-2004

Whiteline Front Control Arm Bushings - WRX 2002-2007 - STI 2004-2007 - Legacy 2000-2004

SKU:WHLN-W52837A

Regular price $57.88 USD
Regular price Sale price $57.88 USD
Sale Sold out

When you upgrade the soft stock suspension bushings with a harder unit, it will take the slop out of your suspension. With a harder bushing, it will not deflect as much during hard use. So it keeps the control in its optimal position. Included in this kit is both the front inner bushings. Your control arms will need to be removed from the vehicle to have the old bushings pressed out. These new bushings are 2-piece, making for easy installation into the control arm. These will transfer more noise and vibration into the cabin so they are not for the faint of heart.

 

This is the 61mm version. Some applications may require the 55mm bushing (part number W51709A). Please verify which one your car uses before ordering.

 

This product is a kit and will replace both the inner lower conrol arm bushings.

Unfortunately, the front control arm bushing for some Subaru models is unable to be determined by model year alone. Subaru used different length bushings interchangeably with no correlation to model year for this location. In order to determine whether part number W51709A or W52837A is necessary, the length of the bushing must be measured prior to ordering. Because the W51709A does not fit, it is highly likely that the W52837A is the correct bushing. W51709A is 55 mm long whereas W52837A is 61 mm long.

View full details

Collapsible content

What's in the Box

Warranty Information

RalliTEK BRANDED PRODUCTS LIFETIME WARRANTY

RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or info@rallitek.com to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

      NOTThis warranty is only available within the United States or Canada

  • This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
  • This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.

MANUFACTURER WARRANTIES (FOR NON-RALLITEK BRANDED PRODUCTS)

Non-RalliTEK branded products do not have any written or implied warranties. Products on RalliTEK.com are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

EXCEPT AS STATED OTHERWISE IN THIS WARRANTY, RalliTEK MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.

Installation Instructions

Applications

Subaru Impreza WRX Base - 2002
Subaru Impreza WRX Base - 2003
Subaru Impreza WRX Base - 2004
Subaru Impreza WRX Base - 2005
Subaru Impreza WRX Base - 2006
Subaru Impreza WRX Base - 2007
Subaru Impreza WRX STI Base - 2004
Subaru Impreza WRX STI Base - 2005
Subaru Impreza WRX STI Base - 2006
Subaru Impreza WRX STI Base - 2007
Subaru Legacy Base - 2000
Subaru Legacy Base - 2001
Subaru Legacy Base - 2002
Subaru Legacy Base - 2003
Subaru Legacy Base - 2004

Frequently Purchased Together