4EAT Transmission Mount Insert Bushing
Enhance your Subaru driving experience with the RalliTEK 4EAT Transmission Mount Insert Bushing. Crafted to be installed in your factory transmission mount, this insert significantly improves shift feel and response, eliminating excess drivetrain movement caused by aging rubber in your original mount. This 4EAT transmission mount is a genuine OEM Subaru part #41022AE121.
Key Features:
- Improved shift feel and enhanced response for an elevated driving experience.
- Designed for the smaller mount specific to Subaru 4-speed automatic transmissions.
- Easy installation in your factory transmission mount, reducing drivetrain movement.
Two Versions Available:
- Soft for everyday street driving.
- Hard for track use (Note: Increases Noise, Vibration, Harshness [NVH] on street-driven cars).
- Free installation in a new OEM AT transmission mount when purchased together (excluding mount installation on the vehicle).
Installation Details:
- Requires removal of the factory mount from the vehicle.
- Best installed with a bench vice for optimal results.
- Comprehensive installation instructions included.
- Typically takes less than one hour to install from start to finish.
WARNING:
- The race version may cause additional NVH.
- Automatic Transmission Only!
- Only works with the one-piece transmission mounts. Some Subaru applications have a two-piece style mount.
Install Difficulty
Est. Install Time -
1 - RalliTEK Transmission Mount Insert Bushing
Refer to OEM installation guide.
This product was great . My 2001 Forester would shake horrendously, but after installing the transmission shifts much nicer and the shake has diminished. Would recommend.
No issues with installation or performance.
Rectified alot of drive line vibration.
I imagine if i had healthy control arm bushings i would have even less or nondriveline vibrations caused by after market cv axles
Thanks for the review!
The insert work very good I still have a little wobble but much better I have put new cv shafts on the front had a real bad wobble now its much better still would like to get rid of the rest of the wobble I am asking if there is anything else that would help with the wobble
thanks Robert
Bushing came well packaged and with some lubricant for insertion process. Using a small benchvise to fit the insert to the mount I found some outer lips of the insert needed to be trimmed off with a sharp Stanley knife.
This was to allow some relief during the start of the press fit proceedings in the vice. The supplied rubber lubricant helped this fitting process as described in video.
The transmission now is held tight with some flex in the mounts.
No more rattling on ignition start up and more confidence in off road driving.
Awesome hardware for the forester.. skid plate fitment spot on. Looks good in the woods . Would buy again.
RalliTEK
13339 NE Airport Way Suite 500
Portland, Oregon
97230
Store Hours
Mon-Fri: 9:00AM - 6:00PM
Sat-Sun: Closed
Please make sure you recieve an email saying your order is ready for pickup before arriving.
Closed
Closing at 6pm
Closing at 6pm
Closing at 6pm
Closing at 6pm
Closing at 6pm
Closed