Skip to product information
1 of 5

Perrin

Perrin Shifter Stop - Fits Subaru WRX 2015-2016

Perrin Shifter Stop - Fits Subaru WRX 2015-2016

SKU:PERR-PSP-INR-018

Regular price $43.00 USD
Regular price Sale price $43.00 USD
Sale Sold out
Shipping calculated at checkout.

The Perrin Shift Stop reduces the inherent shifter play in the 2015-2016 Subaru WRX. From the factory, the shifter will have about an inch of slop from the 1st into 2nd gear gate, and about a .40” from the 5th into 6th gear gate. 

The Perrin Shift stop will reduce all movement in all gears down to .12”. With hand tools, expect about 45 minutes to install this part.

ESSENTIAL MOD

Due to the slop of the internals in the transmission, there is an unacceptable amount of horizontal slop within the 1st- and 2nd- gear shift gates. What should be little to no movement ends up being nearly 1.0 inch of play. This makes for an unnatural placement of shift gates and a lost feeling of which gear you are in. The PERRIN Shifter Stop removes this play, reducing the horizontal movement to 0.12 inches. This makes for a solid connection between the driver and transmission.


DESIGN

The PERRIN Shifter Stop is perfectly designed to bolt directly to the shifter. Being constructed from 6061-T6 Aluminum allows for countless downshifts from 3rd to 2nd gear without worry of damaging the shifter stop or shifter.


BONUS FEATURE

Included with each PERRIN Shifter Stop is hardware that removes an existing gap in the shifter assembly, further reducing lateral shifter assembly movement.


FINISH

The PERRIN Shifter Stop is anodized black to provide a hard yet smooth surface for your shifter to rest against during 1st to 2nd gear shifts. This also keeps your shifter stop looking nice forever.

View full details

Collapsible content

What's in the Box

Warranty Information

RalliTEK BRANDED PRODUCTS LIFETIME WARRANTY

RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or info@rallitek.com to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

      NOTE: This warranty is only available within the United States or Canada

  • This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
  • This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.

MANUFACTURER WARRANTIES (FOR NON-RALLITEK BRANDED PRODUCTS)

Non-RalliTEK branded products do not have any written or implied warranties. Products on RalliTEK.com are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

EXCEPT AS STATED OTHERWISE IN THIS WARRANTY, RalliTEK MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.

Installation Instructions

Applications

Subaru Impreza WRX Base - 2015
Subaru Impreza WRX Base - 2016