RalliTEK Lifted HD Adjustable Front Endlinks - WRX & STI 15-21 / FOR 14-18 / XV CROS 13-17 / LEG 10-14
RALLITEK LIFTED HD ADJUSTABLE FRONT ENDLINKS - WRX & STI 15-17 / FOR 14-16 / XV CROS 12-16 / LEG 10-14
RALLITEK LIFTED HD ADJUSTABLE FRONT ENDLINKS - WRX & STI 15-17 / FOR 14-16 / XV CROS 12-16 / LEG 10-14

RalliTEK

Lifted HD Adjustable Front Endlinks - Fits 2010-2014 Subaru Outback & Legacy

SKU: RTEK-113706 ISBN: RTEK-113706
$167.99

RalliTEK HD Adjustable Endlinks for your Subaru is designed for direct replacement, extended/adjustable front HD end links specifically for lifted applications.

Read More
Lifetime Warranty

Fitment guaranteed for USDM models only.
Non-USDM vehicle owners, please contact us to check compatibility.

2 - Front Adjustable Endlinks

Estimated DIY Install Time | 2 Hours

Install Difficulty |

Proposition 65

WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands.

For more information, see: www.P65Warnings.ca.gov/motor-vehicle-parts
Off-Road Use Only

This product is intended for off-road use only, and installation and operation are at the vehicle owner's discretion and responsibility in accordance with local state/federal laws. Click Here For More Info.

Lifted HD Adjustable Front Endlinks - Fits 2010-2014 Subaru Outback & Legacy

RalliTEK Lifted HD Adjustable Front Endlinks for the 2010-2014 Subaru Outback & Legacy designed these direct replacement extended/adjustable front HD end links specifically for lifted applications. Featuring an anodized aluminum turnbuckle with lock nuts for easy length adjustment. Our HD end links help reduce suspension slop and increase side-to-side response. These are compatible with factory or aftermarket sway bars.

FEATURES:

  • 30% thicker material than the factory links
  • Outlast and outperform OEM end links
  • Extended length optimized for lifted applications
  • Designed for vehicles with 1-3 inches of lift.

The perfect fit for the newer generations of Subarus. Don't believe other endlink manufacturers that say the same part number fits older models as well as the new ones. The difference is that older Subaru endlinks use an M10 stud, and the newer Subaru's use M12 for their endlink bolts. Older endlinks will technically fit but are prone to clicking as the smaller stud shifts in the larger hole of the swaybar.

With that, you'll find superior fitment with RalliTEK. Performance needed to be precise enough for the track and strong enough for the trail.

RalliTEK HD heavy-duty endlinks are designed to outlast and outperform your factory sway bar endlinks.


RalliTEK HD endlinks feature a polished steel ball-and-socket (not plastic like the factory) and adjustable length to dial in the perfect bar angle at any ride height. These are a perfect addition when upgrading your sway bars or when changing your ride height.

*The product contains two end links*

  • 5 stars: 8 (89%)
  • 4 stars: 0 (0%)
  • 3 stars: 1 (11%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
D
Dillon
Great Product

these end links are great! makes adjusting the sway bar a breeze and they're solid. would highly recommend to anybody installing a lift kit or altering suspension geometry in their subaru

A
Apex M.&.L.
End LInks

The RalliTek Adjustable end links are decent quality, however, I wish these ones were a bit shorter. They seem to be slightly too long and hit the inner tie rod while turning lock to lock, even in their shortest position.

Hello,

We have shorter versions available for non-lifted applications up to about a 1' lift on our website. This endlink is too only be used if the vehicle has a 2+ inch lift on the vehicle.

B
Brandon

Came in Already Assembled Thank you 👍 last year I had to assemble it myself

R
Russell

Excellent offroad suspension upgrades. Changed my crosstrek to a beast. Recommend to all. Will purchase from them again.

B
Brandon

Extremely high quality product 😮‍💨👌

t
t.h.

This made MASSIVE difference in the handling of my '13 Outback. I hadn't realized how much the sway bar angle had dulled the sway bar response. After installing these, the sway bar it back up where it belongs and my car handles like it did before the lift!

L
Luis A.
AMAZING!!

Amazing feeling offroading! You have no idea how frustrating it was not being able to find good links until now 🥲🥲

N
NOEL A.
Excellent

Easy to install

J
John F.
quick shipping but don't work well

can not seem to keep the ajust nuts tight and they rub the tie rods on full lock with suspension compressed went back to factory looks like i am stuck with these

R
Roland

For 2011 Outback 3.6r limited, will these work prior to lifting as well as after 1.5-2 inch lift (are they short enough at their minimum for non lifted)

RalliTEK

These Lifted Adjustable Endlinks are designed for vehicles with 1-3 inches of lift. We would recommend installing these once you have your lift installed on your vehicle.

N
Nathaniel

I have a flatout gr light suspension package,
that raised my outback by 2.5 inches. The new stock swaybar links I installed (the bushings) are visably stressed inwards. due to the new suspension travel each time the car is raised and were hard to fit into place until I compress the shock slightly. Although when the car is on its wheels the links seem to be in the right oreintation. So longer end links seem like they might not fit the issue? Would this kit work if the shock itself is the cause of the lift? (Im new to the aftermarket lift gang)

RalliTEK

Longer adjustable endlinks will help with lift and when the suspesion is in full extension. Please keep in mind we do not test our endlinks on other brands of suspension only OEM and Rallitek lift kits do we design and test for proper fitment and angle.

c
chad

Hi,
Can the Lifted HD Adjustable Front Endlinks fit a 2018 forester, with a 2" lift?

RalliTEK

Yes these will work on your vehicle with a 2" lift.

c
chad

Hi,
Can the Lifted HD Adjustable Front Endlinks fit a 2018 Forester?

RalliTEK

Yes these do fit the 18 Forester's.

M
Matthew F.

Hi Team,

I am just enquiring about the adjustable endlinks for the 2013 subaru XV (lifted) what is the size of the end links are they M10?

Thank you for your time matt

RalliTEK

These are a M12 stud size. That is what comes on the 2013 Subaru XV Crosstrek.

Lifetime Warranty

Designed | Assembled | Made In The USA

Rallitek Subaru Performance 25th Anniversary logo with blue and black design

Over 25 Years Building Subaru Parts | EST.2001