KYB Excel-G Front Left Strut - Legacy 2010-2012
KYB Excel-G Front Left Strut - Legacy 2010-2012
Restore your vehicle's original performance for normal driving conditions with this twin-tube gas hydraulic strut that offers additional damping force to compensate for things like age and miles driven. This strut is application-tuned to meet the specific needs of your vehicle and provide consistent performance.
KYB is the world's largest supplier of shocks and struts to new vehicle manufacturers, and the Excel-G is built on the same assembly lines. It uses the very same high quality components that together work to restore the vehicle's originally designed capabilities such as handling and stability. The Excel-G is a twin-tube gas hydraulic shock that consists of an inner working cylinder and an outer fluid reservoir. The shaft and piston force hydraulic fluid in and out of both, which dampens the vehicle's body movement. Two multi-stage valves of the shock work to provide better handling characteristics during virtually all driving conditions. The working cylinder that the piston works in is also very important, that's why the experts at KYB use extruded tubing which provides a positive seal and consistent performance.
- Designed to restore original handling and control
- Calibrated to compensate for age and miles driven
- Built with quality that matches or exceeds OE
- Twin tube design for maximum ride comfort
- Highly polished chrome plated shaft to reduce upper seal wear
- Precision multi-stage valves reduce fluid travel to minimize aeration
- Seamless inner cylinder and sleeves – more strength, no leaks and no noise
- Seamless mounts and bonded bushings add strength and eliminate noises
- Solid seamless mounting eye rings and bolt bushings won't separate and become noisy
- Recommend replacement in pairs
What's in the Box
RalliTEK BRANDED PRODUCTS LIFETIME WARRANTY
RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.
If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.
For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or email@example.com to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.
NOTThis warranty is only available within the United States or Canada
- This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
- This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.
The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.
MANUFACTURER WARRANTIES (FOR NON-RALLITEK BRANDED PRODUCTS)
Non-RalliTEK branded products do not have any written or implied warranties. Products on RalliTEK.com are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.
There is no warranty on high-performance or race-related parts due to the nature of usage.
No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.
EXCEPT AS STATED OTHERWISE IN THIS WARRANTY, RalliTEK MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.
Subaru Legacy Base - 2010
Subaru Legacy Base - 2011
Subaru Legacy Base - 2012
- Choosing a selection results in a full page refresh.
Net Orders Checkout