1 1

Nameless Performance

Nameless Intake Wrinkle Black - Fits 2019-2024 Forester

Nameless Intake Wrinkle Black - Fits 2019-2024 Forester

NAME-IN-TO-2-BLK-19FOR

$315.00 USD
$315.00 USD
Sale Sold out
Shipping calculated at checkout.

Add midrange torque and horsepower with an intake that is built to last.
Sometimes a product is designed to solve one issue, but the benefits go far beyond expectation. In the case of our new factory replacement intake system, we designed to remedy the regular failure of the factory plastic intake tube, and got the result of significant power gains.

Design:
The factory intake tube connects the airbox and mass airflow sensor to the throttle body, and in the case of the 3.6R that is achieved with a thermoplastic rotomolded tube that, over time, has a potential to develop cracks in its flexible bellows. A crack in that part results in rough engine idle with compromised driveability and an instant check engine light, not to mention an intake system that is directly ingesting underhood dirt and grime. Nobody wants that. And thermoplastics are always in a state of entropy, especially so in high temperature environments like an engine bay.

The upgrade is here: our system replaces that entire themoplastic intake and flow disrupting silencer assembly with a mandrel bent stainless tube and five layer reinforced high temp silicone couplers. The factory breather tube connection is retained and the breather fitting is made of billet stainless steel and TIG welded in place. The result is a replacement part that has improved function and form.

Power Improvement
We didn't intend to spend time bringing this product to the dyno, but after the initial installation on our test car, customer reaction to the improved power was significant. They noticed the difference within the first half mile of leaving the shop, and continued to remark about what a difference the system made in midrange pickup during regular driving. So we put the car back to stock and tossed it on the dyno, then swapped this replacement intake on and ran it again. The gains were significant - with over 15ft lb of torque and horsepower to the wheels at 5200rpm and a significant amount across the entire powerband, averaging 7hp and 8ft lb from take off to redline. That's a noticeable difference - and the design provides an underhood solution that you can buy once and have last the life of your car.

Options
Our classic wrinkle red and wrinkle black powdercoating options are back for this new product line. The powdercoat provides enough texture to give a good match for most other red powdercoated parts on the market as well as having the ability to be easily wiped down and kept clean. Looking for a custom color? Just ask for an unfinished brushed stainless option in the notes of your order and you can customize the part in the finish of your choice.

Don't let the time honored tradition of a cracked factory intake tube leave you stranded - upgrade before that happens and save yourself a tow, or an even bigger headache in the backcountry.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tony D.
Nice solid piece

Very pleased. The aluminum tube is surprisingly heavy. Well made, fits perfectly. The hose clamps loosen up quite a bit and need re tightening, so far every few days. Definitely louder, since it removes 2 or three resonance chambers. I combined this intake with an AEM drop-in filter and an HKS Legamax axle-back muffler (which is excellent). This gives a modest but noticeable performance boost (guessing 5-6 hp) and a nice growl on full throttle. Well done Nameless.

View full details

What's in the Box

Warranty Information

RalliTEK BRANDED PRODUCTS LIFETIME WARRANTY

RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or info@rallitek.com to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

      NOTE: This warranty is only available within the United States or Canada

  • This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
  • This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.

MANUFACTURER WARRANTIES (FOR NON-RALLITEK BRANDED PRODUCTS)

Non-RalliTEK branded products do not have any written or implied warranties. Products on RalliTEK.com are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

EXCEPT AS STATED OTHERWISE IN THIS WARRANTY, RalliTEK MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.

Installation Instructions

Applications

Frequently Purchased Together

View all