Skip to product information
1 of 4


Heavy Duty Front Adjustable Endlinks - Fits 2003-2013 Forester

Heavy Duty Front Adjustable Endlinks - Fits 2003-2013 Forester


Regular price $113.40 USD
Regular price Sale price $113.40 USD
Sale Sold out
Shipping calculated at checkout.

RalliTEK designed these direct replacement front HD end links that will work with factory or aftermarket sway bars. Steel construction ensures your heavy aftermarket swaybar won't destroy your end link. The RalliTEK end link reduces slop in your suspension articulation. 



30% thicker material than the factory.

Outlast and outperform OEM links.

Greasable and serviceable joints

Designed for OEM height to 1" Lift Vehicles

The product contains 2 endlinks.


The factory end links in your Subaru's rear control arm are made out of a lower durometer rubber. Over time the rubber becomes weak allowing more "slack" in the suspension. RalliTEK realized the factory end links were a little weak, especially when upgrading your sway bars or other rear suspension components.


RalliTEK designed a direct replacement HD end link that will work with factory or aftermarket sway bars.


RalliTEK HD heavy-duty end links are designed to outlast and outperform your factory sway bar end links. Featuring a polished steel ball and socket, (factory end links utilize a plastic socket to ensure smooth operation but at the cost of strength)


RalliTEK HD end links features, a material 30% more rigid than the factory, steel alloy construction, polished steel ball socket(not plastic like the factory), and adjustable length to dial in the perfect bar angle at any ride height. These are a perfect addition when upgrading your sway bars or when changing your ride height.

Install Difficulty

See Install Difficulty Guide for more info

Est. Install Time -

2 Hours
View full details

Collapsible content

What's in the Box

Warranty Information


RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

      NOTE: This warranty is only available within the United States or Canada

  • This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
  • This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.


Non-RalliTEK branded products do not have any written or implied warranties. Products on are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.


Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.

Installation Instructions


Compatible with:
2003-2013 Subaru Forester

Customer Reviews

Based on 3 reviews
Mike K.
Better than stock, but the grease zerks don't install well.

Everything Rallitek I've had has been really good, but I'm not the biggest fan of these end links. For $100, they could have the end grease zerks installed. I could barely get them started because the shield they go into rotates pretty freely, and even then they were just about impossible to get to go in straight so they just look bad. I know tons of end links have you install the zerks, and I have before, but these just didn't go in well like all others I've worked with.

Hello Mike,

I'm sorry to hear you weren't 100% satisfied. We have actually since revised all of our endlinks to come with grease and the grease fittings installed. If you have any issues due to these concerns we do have a lifetime warranty on our components so just let us know and we can get you taken care of. We appreciate the feedback!

David M.
Fixed the over-center issue on my lifted Forester!

Not only beefier than the stock items, but set them about 20mm longer front and rear to fix issues after installation of my 1.5" lift and King springs.

Thanks for the review!

Rory G.
RalliTEK Heavy Duty Front-Rear Adjustable Endlinks - Fits Subaru STI 2004-2014 - WRX 2002-2014 - ...

Awesome quality, easy install and have been Preforming great on my 2010 WRX!