Skip to product information
1 of 1


Cometic Head Gasket 98mm .040 - Fits Subaru Legacy 1990-1996 - More

Cometic Head Gasket 98mm .040 - Fits Subaru Legacy 1990-1996 - More


Regular price $52.24 USD
Regular price Sale price $52.24 USD
Sale Sold out

The Cometic MLS (Multi Layer Steel) gasket is comprised of three layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250C or 482F. And the gaskets are applied dry with no additional coating needed! 

One Gasket Included in this item, 2 are required for a full motor build.

The center or shim layer of the gasket is comprised of an uncoated stainless steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks. 

The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion. 

View full details

Collapsible content

What's in the Box

Warranty Information


RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

      NOTThis warranty is only available within the United States or Canada

  • This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
  • This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.


Non-RalliTEK branded products do not have any written or implied warranties. Products on are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.


Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.

Installation Instructions


Subaru Impreza L AWD - 1995
Subaru Impreza L - 1995
Subaru Impreza L AWD - 1996
Subaru Impreza Outback AWD - 1996
Subaru Legacy L - 1990
Subaru Legacy L 4WD - 1990
Subaru Legacy LS 4WD - 1990
Subaru Legacy LS - 1991
Subaru Legacy L - 1991
Subaru Legacy L 4WD - 1991
Subaru Legacy LS 4WD - 1991
Subaru Legacy LSi 4WD - 1991
Subaru Legacy L AWD - 1992
Subaru Legacy LS - 1992
Subaru Legacy L - 1992
Subaru Legacy LSi AWD - 1992
Subaru Legacy L AWD - 1993
Subaru Legacy LS - 1993
Subaru Legacy LS AWD - 1993
Subaru Legacy L - 1993
Subaru Legacy LSi AWD - 1993
Subaru Legacy Base - 1994
Subaru Legacy Base - 1995
Subaru Legacy Brighton AWD - 1996
Subaru Legacy L AWD - 1996
Subaru Legacy LS AWD - 1996
Subaru Legacy LSi AWD - 1996
Subaru Legacy Outback AWD - 1996

Frequently Purchased Together