Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry.
Benefits of a Clutch Masters Light Weight flywheel:
Light-weight for improved performance and Quicker Rev’s.
(Aluminum Flywheels) Consist of a replaceable heat shield (friction surface), eliminating need to resurface flywheel.
Reduces turbo “lag” in turbo-charged engines.
Increased supercharger efficiency due to less drag on the crank.
Improved mid-range torque in naturally aspirated engines.
CNC Machined and balanced.
SFI Certified.
Replacing your OEM flywheel with a light weight flywheel may cause gear noise or a vibration that may not be suitable for everyone. The lighter the flywheel the more gear noise will be produced. Depending on the application Clutch Masters usually recommends Steel flywheels rather than Aluminum flywheels since Aluminum flywheels will cause more gear noise. Aluminum flywheels are usually only recommended for race applications looking to have the least amount of weight as possible. A light weight flywheel may affect the life expectancy of a clutch kit depending on the application.
Going from a Dual-Mass Flywheel (DMF) to a Single-Mass Flywheel (SMF):
A Dual Mass Flywheel (DMF) is a flywheel in two concentric parts or two facing flywheels stuck together with flexible compound to damp down transmitted vibration and gear rattle for the gear box. Many newer model vehicles now come standard with a factory DMF. Many times enthusiast choose to replace a DMF with a SMF and here is why:
DMF’s tend to be more expensive than a SMF.
DMF’s are not designed to be resurfaced like conventional SMF.
DMF’s usually weigh 30+ lbs depending on the application which will cause unwanted turbo lag.
DMF’s cannot withstand a high rate of abuse and may fail under spirited driving.
Benefits of switching to a SMF:
Reduced mass equals increased acceleration.
Reduces turbo “lag” in turbo-charged engines.
Increased supercharger efficiency due to less drag on the crank.
Improved mid-range torque in naturally aspirated engines.
SMF are able to be resurfaced and can be reused.
Clutch Masters offers Aluminum or Steel SMF depending on the application. We recommend you replace your DMF with a Steel SMF if the vehicle will be driven on the street since it will produce less noise and will be more pleasant to drive on the street compared to an Aluminum SMF. Aluminum flywheels are only recommended for race applications looking to have the least amount of weight as possible. By replacing a DMF with a SMF you may experience gear rattle and a vibration that may not be suitable for everyone. SMF may also reduce the life expectancy of a clutch kit depending on the application.
Need Install? We do installs right here at RallITEK HQ and also have hundereds of dealers all over the country. Click here to learn more.
What's In The Box
Installation Instructions
Applications
Subaru Impreza WRX Base - 2006
Subaru Impreza WRX Base - 2007
Subaru Impreza WRX Base - 2013
Subaru Impreza WRX Base - 2011
Subaru Impreza WRX Base - 2012
Subaru Impreza WRX Base - 2008
Subaru Impreza WRX Base - 2009
Subaru Impreza WRX Base - 2010
