ClutchMasters Aluminum Flywheel - WRX 2002-2005 / 2004-2005 Baja Turbo / Forester XT 2004-2005 / Legacy Sport 1991-1994
ClutchMasters

ClutchMasters Aluminum Flywheel - WRX 2002-2005 - 2004-2005 Baja Turbo - Forester XT 2004-2005 - Legacy Sport 1991-1994

SKU: CLMA-FW-671-U-AL ISBN: FW-671-U-AL
$479.75
$479.75

Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromed units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long-lasting durability. The unit is buttoned together with military-grade fasteners to make the premier flywheel in the industry.

Benefits of a Clutch Masters Light Weight flywheel:

  • Light-weight for improved performance and Quicker Revs.
  • (Aluminum Flywheels) Consist of a replaceable heat shield (friction surface), eliminating the need to resurface the flywheel.
  • Reduces turbo “lag” in turbo-charged engines.
  • Increased supercharger efficiency due to less drag on the crank.
  • Improved mid-range torque in naturally aspirated engines.
  • CNC Machined and balanced.
  • SFI Certified.

Replacing your OEM flywheel with a lightweight flywheel may cause gear noise or a vibration that may not be suitable for everyone. The lighter the flywheel the more gear noise will be produced. Depending on the application Clutch Masters usually recommends Steel flywheels rather than Aluminum flywheels since Aluminum flywheels will cause more gear noise. Aluminum flywheels are usually only recommended for race applications looking to have the least amount of weight possible. A lightweight flywheel may affect the life expectancy of a clutch kit depending on the application.
 
Going from a Dual-Mass Flywheel (DMF) to a Single-Mass Flywheel (SMF):
 
A Dual Mass Flywheel (DMF) is a flywheel in two concentric parts or two facing flywheels stuck together with a flexible compound to damp down transmitted vibration and gear rattle for the gearbox. Many newer model vehicles now come standard with a factory DMF. Many times enthusiasts choose to replace a DMF with an SMF and here is why:
 
  • DMF’s tend to be more expensive than SMF.
  • DMF’s are not designed to be resurfaced like conventional SMF.
  • DMF’s usually weigh 30+ lbs depending on the application which will cause unwanted turbo lag.
  • DMF’s cannot withstand a high rate of abuse and may fail under spirited driving.
Benefits of switching to an SMF:
 
  • Reduced mass equals increased acceleration.
  • Reduces turbo “lag” in turbo-charged engines.
  • Increased supercharger efficiency due to less drag on the crank.
  • Improved mid-range torque in naturally aspirated engines.
  • SMF are able to be resurfaced and can be reused.
Clutch Masters offers Aluminum or Steel SMF depending on the application. We recommend you replace your DMF with a Steel SMF if the vehicle will be driven on the street since it will produce less noise and will be more pleasant to drive on the street compared to an Aluminum SMF. Aluminum flywheels are only recommended for race applications looking to have the least amount of weight possible. By replacing a DMF with an SMF you may experience a gear rattle and a vibration that may not be suitable for everyone. SMF may also reduce the life expectancy of a clutch kit depending on the application.

Subaru Baja Base - 2004
Subaru Baja Base - 2005
Subaru Impreza WRX Base - 2002
Subaru Impreza WRX Base - 2003
Subaru Impreza WRX Base - 2004
Subaru Impreza WRX Base - 2005
Subaru Forester 2.5 XT - 2004
Subaru Forester 2.5 XT - 2005
Subaru Legacy Sport 4WD - 1991
Subaru Legacy Sport AWD - 1992
Subaru Legacy Sport AWD - 1993
Subaru Legacy Sport AWD - 1994

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)