Skip to product information
1 of 3

RalliTEK

Bilstein B8 Suspension Lift Kit - Fits 2010-2014 Subaru Outback

Bilstein B8 Suspension Lift Kit - Fits 2010-2014 Subaru Outback

SKU:RTEK-100546

Regular price $1,729.00 USD
Regular price Sale price $1,729.00 USD
Sale Sold out
Shipping calculated at checkout.
  • LIFETIME GUARANTEE
  • ASSEMBLED IN-HOUSE

RalliTEK's Outback Lift Springs and Bilstein B8 Shocks are the ultimate duo to take your Subaru Outback's off-road capabilities to new levels. When we set out to develop a suspension lift for the Subaru Outback, we wanted to create a product that dominates anything else on the market. Allowing you to install aggressive off-road tires for better performance in inclement conditions and off-road.

RalliTEK lift kits take Subaru's already epic platform and transform it into an off-road powerhouse. These lift kits are the most advanced suspension systems available for Subarus. Our exclusive spring technology dramatically increases the vehicle's performance off-road while increasing the ability to carry more weight or add accessories.

  • Lift Height - 1.5" Lift
  • More responsive handling and turn-in
  • Increased approach & departure angles
  • Extremely improved off-road performance
  • Keeps factory on-road ride quality
  • Increases ability to carry more weight on the vehicle
  • No drilling or cutting, complete bolt-on kit
  • Lifetime warranty (Springs Only) 
  • Sold in pairs
  • Visit our Tire Sizing Chart

RalliTEK recommends performing an alignment anytime suspension or other steering components are changed or replaced.

Install Difficulty

See Install Difficulty Guide for more info

Est. Install Time -

4 Hours
View full details

Collapsible content

What's in the Box

x2 Front Bilstein B8 Strut Assemblies
x2 Rear Bilstein B8 Strut Assemblies

Warranty Information

RalliTEK BRANDED PRODUCTS LIFETIME WARRANTY

RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or info@rallitek.com to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

      NOTE: This warranty is only available within the United States or Canada

  • This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
  • This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.

MANUFACTURER WARRANTIES (FOR NON-RALLITEK BRANDED PRODUCTS)

Non-RalliTEK branded products do not have any written or implied warranties. Products on RalliTEK.com are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

EXCEPT AS STATED OTHERWISE IN THIS WARRANTY, RalliTEK MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.

Installation Instructions

Applications

2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
Brian Y.
Game Changer!

After rolling 111k on the original factory suspension it was time for an upgrade. These Bilstein TerraSport B8s mated with Rallitek’s Outback Lift Springs are a game changer! I have driven ~3,000 miles now with this suspension setup (on-road, off-road, unloaded driving by myself, loaded driving with the family and fully load cargo) and I have nothing but positive feedback. The 1.5” lift gives my Outback a nice aggressive stance. On-road this suspension setup is a well-balanced firm ride (not harsh) and there is no body roll when taking corners; my Outback feels well planted and steering feedback is excellent! Off-road this suspension setup handles equally well adapting to the changing terrain conditions, bumps and ruts are well absorbed without jarring feedback.

I increased the sidewall of my tires from the factory 225/60R17 to 225/65R17 but experienced some rubbing in the rear wheel well, so I added the Bilstein TerraSport B8 1” subframe spacers using Rallitek’s Rear Subframe Drop Bolts. The factory rear subframe bolts were too short; after installing the subframe spacers there is no more rubbing.

Looking forward to the next 100k+ miles with this suspension setup!

Also, shoutout to Dallin at Rallitek who was helpful whenever I called and had questions!