Entretoises de rehaussement avant en aluminium de 1/2" - Compatibles avec la Subaru Outback 2010-2019
Ces entretoises en aluminium s'installent directement sur votre coupelle d'amortisseur. Idéales pour ajouter de la hauteur à l'équipement d'origine ou de rechange d'un véhicule, ou pour aider à niveler l'écart de votre garde-boue. L'entretoise de rehaussement en aluminium offre une résistance supérieure à nos anciennes entretoises de rehaussement en PEHD, vous offrant la solution la plus robuste pour votre Subaru tout-terrain.
Comprend :
- Entretoises avant de 1/2"
- Construction en aluminium usiné
- Ajustement OEM pour une installation sans problème
- Tout le matériel nécessaire à l'installation
Stacked these with some 2 inch spacers for a custom 2.5 front lift, worked great, spacers from rallitek are clearly high quality and I would buy again.
great but I needed to mod due to spec b strut mounts
The spacers are good. Taking apart the strut assembly is a real pain to install them. I have not installed them because my strut mount was loose after re-assembly.
As advertised they increase the height 1/2". Installation is fairly straight forward and not too complicated. The only problem is being able to hold the bolt whilst tightening the nut. On one of the 3 bolts needed to mount the strut hat I needed to use a 6mm stubby hex to hold the bolt while tightening the nut and It was very difficult to make this happen. Customer support stated that the spacers had nuts recessed up in 'em, nah they did not
Put these in my 05 Forester with 255k miles. Very good springs!
Will these work with the 2” lift I already have installed?
These will work as long as you do not already have lift spacers installed, and have OEM style strut mounts!
Garantie à vie
Conçu | Assemblé | Fabriqué aux États-Unis
