Plaque de protection de transmission - Convient aux Subaru Crosstrek 18-23
Notre plaque de protection de transmission pour Subaru Crosstrek 18-23 est intelligemment conçue pour offrir une protection maximale à la transmission de Subaru avec une perte minime, voire nulle, de garde au sol. Si vous conduisez votre Subaru Crosstrek en tout-terrain, cette plaque de protection en aluminium haute résistance vous assure une tranquillité d'esprit lors de la traversée de terrains comportant des rochers, des souches ou tout autre danger hors route. Nos plaques de protection de transmission offrent une plus grande couverture et augmentent la protection dans les zones de choc les plus courantes de la transmission de votre voiture.
Notre plaque de protection en aluminium haute résistance est fièrement fabriquée aux États-Unis et est la plaque de protection Subaru la plus durable sur le marché. Cette conception de plaque de protection est un boulonnage complet qui s'intègre parfaitement à nos plaques de protection avant pour une protection complète du soubassement. Lorsque vous ajoutez une suspension tout-terrain à votre Subaru, les plaques de protection RalliTEK sont essentielles pour votre sécurité sur les sentiers.
- Conception entièrement boulonnée
- Fabriquée en aluminium haute résistance de 1/8 po d'épaisseur
- Couverture accrue par rapport à la plaque de protection OEM
- Perte de garde au sol minime, voire nulle
- Doit être utilisée avec la plaque de protection avant Crosstrek de RalliTEK
- Garantie à vie
- Fabriquée aux États-Unis
Besoin de plus de protection ? Associez votre plaque de protection de transmission à une plaque de protection de différentiel RalliTEK et à des barres de protection latérales pour un ensemble de protection complet.
Si vous avez des questions sur le produit, l'installation ou l'ajustement, vous pouvez cliquer sur le bouton de discussion ou nous appeler dès maintenant au 503-619-0055.
Fits great front skid plate needs some trimming to fit with off road bumber
Other than a very slight contact with the heat shield on a component of the exhaust system (which I was able to nip with my M12 oscillating tool), and some contact with the exhaust pipe, which I was able to eliminate using a couple of flat washers, the installation process was very self-explanatory and straightforward. Great safety factor for peace of mind regarding the fuel tank! Thank you for fabricating these great skid plates!
Hello,
We're glad to hear you like them. We have ran into this issue with it contacting the exhaust as well and are working on including this into our install instructions. Our goal with our skid plates is too provide the most coverage possible we felt it was worth the small trim if we have better coverage all around. Thank you for the review and please let us know if you need anything else!
I should have bought this when I bought the front skid plate. I recommend using a lift for easier handling and to get those 2 subframe bolts out, I couldn't do it under ramps so took where I could get some lift time but was also installing my lift so 3.5 hors total but the plate too like 20 minutes. Installed on 2018 Crosstrek.
Excellent product
Subaru dealer did a good installation. Had them put thread locker on the bolts and torque them to 30Nm. Bent up the left rear corner of the skid plate when it landed on a rock. I think the left Subaru splash shield got bent also. Not sure the thicker skid plate would have made any difference. At least I didn't hit the transmission pan, again. Would like to put on larger diameter tires but my Subaru Service Advisor says Eysight can not be calibrated to accomodate more ground clearance. Guess I'll just continue hit the rocks and bend the skid plate some more. I used to use 1/8 inch thick steel boiler plate for skid plates on my dune buggy. Probably bends less than aluminum. I think my Wilderness could handle the increased weight. If you fabricate one I volunteer to stress test it for you.
Love the build of it and the install was very straightforward
Was easy to put on and fits good
Total Protection Package - Fits 20-25 Subaru Outback & Wilderness
I purchased the three piece set and the trans plate started to make loud cracking stress noises. Removed and replaced flat on floor as directed by Ralitek. Still creaks and pings over every bump. Front and diff are OK but I had to remove Trans plate so now I have an expensive piece of scrap metal in my garage. Cannot recommend Trans plate. Others are okay.
Hello,
We're sorry you were not satisfied with the transmission skid plate. We've sold hundreds of these skid plates and have them on 4 of our company vehicles including our 2024 Crosstek Wilderness. We have not ran into this issue on our 2024 Crosstrek Wilderness but have had it happen on our 2021 Outback. When it happened on our Outback we found the skid plate was binding up as the chassis was trying to flex over bumps and uneven road. Once we un-torqued and re-torqued the bolts with the vehicle on the ground it went away and hasn't happened since. It seems to be an issue with the procedure of it being installed and or something about your vehicle specifically that is causing the issue. We've only heard a couple times of this issue over the years of selling this skid plate so there has too be something unique about your instance or scenario causing for the issue.
We loved it and so did our customer!
Small Glitch wit Fitment of Under Pan Only One Hole would align with the 4 predrilled holes.I re-drilled out the 4 holes 1/16" of an inch. Quality of workmanship and material The best.
Hi there! Thank you for taking the time to leave a review for our Transmission Skid Plate. We're glad to hear that it provided good protection for your Subaru Crosstrek. We apologize for any inconvenience with the fitment of the under pan. Our team will make note of this and work towards improving it in the future. Nonetheless, we're happy to hear that the quality of workmanship and material met your expectations. Thank you for choosing our product. Have a great day!
The quality of the product is very good. You may lose a bit of clearance but the advantage of having armor is clear once you install the plate. I had to ream the rear hole 1/8" for the bolt to center on the threads. Be prepared with a file or drill.
Thomas apricate the feedback. We will evaluate the tolerances on the bolt holes of the skidplate and check manufacturing docs with QC. Please keep in mind when installing anything large with multiple mounting points it is best to just start the bolts finger loose, this allow for some fitment and fine adjustment before tightening down the bolts. Thank you one again for the feedback and support. Team Rallitek
Good stuff excellent protection, thank you very much
Transmission Skid Plate - Fits 18-23 Subaru Crosstrek
Fitment is easy and great and provides much needed protection
Garantie à vie
Conçu | Assemblé | Fabriqué aux États-Unis
