Ensemble de plaques de protection de soubassement - Compatible avec Subaru Forester 19-24
Notre ensemble de plaques de protection de soubassement pour le Subaru Forester 19-24 comprend nos plaques de protection du moteur, de la transmission et du différentiel. Cet ensemble de blindage tout-terrain à triple protection constitue un kit de protection de soubassement très durable avec une zone de couverture beaucoup plus grande que les autres plaques de protection sur le marché. Ces plaques de protection du dessous de caisse protégeront votre Subaru contre les dommages coûteux sur les sentiers et sont très résistantes à la corrosion par rapport aux plaques de protection en acier.
Ces plaques de protection Subaru en aluminium sont fièrement fabriquées aux États-Unis et offrent la protection de soubassement la plus durable sur le marché. Notre conception de plaque de protection est un système boulonné qui s'intègre parfaitement au dessous de caisse de votre véhicule pour un ensemble de blindage presque impénétrable. Avec ce blindage Subaru, vous pouvez vous concentrer sur le sentier devant vous au lieu de vous soucier des dommages au véhicule. Lorsque vous ajoutez une suspension tout-terrain à votre Subaru pour être plus capable d'aventurer plus loin, les pièces de blindage de carrosserie RalliTEK sont obligatoires à ajouter à votre véhicule.
- Plaques de protection moteur, transmission et différentiel
- Conception entièrement boulonnée, pas de découpe ni de perçage
- Fabriqué en aluminium haute résistance de 3,2 mm d'épaisseur
- Couverture maximale du soubassement par rapport à d'autres conceptions
- Protection accrue dans les zones d'impact courantes
- Peu ou pas de perte de garde au sol
- Bénéficie d'une garantie à vie
- Fabriqué aux États-Unis
Besoin de plus de protection ? Associez votre ensemble de protection de soubassement avec les protections latérales RalliTEK pour un ensemble de protection complet.
Nos plaques de protection RalliTEK sont fièrement fabriquées et testées aux États-Unis !
La plaque de protection de différentiel RalliTEK protégera votre différentiel arrière des dangers hors route, tels que les roches rugueuses et les débris de sentier. La plaque de protection est fabriquée en aluminium de 3/16 po pour une résistance exceptionnelle tout en minimisant le poids. Notre plaque de protection est conçue pour permettre des changements de fluide faciles sans qu'il soit nécessaire de la retirer. Les bords avant et latéraux inclinés empêchent la plaque de s'accrocher aux roches ou autres obstacles. Le côté conducteur de la plaque de protection est conçu pour une garde au sol maximale de l'échappement.
Caractéristiques :
- Protège votre différentiel arrière des roches et des débris dangereux
- Fabriqué en aluminium de 3/16 po solide et léger
- Dispositions pour faciliter les changements de fluide
- Fournit un point de levage arrière facile
- Bords avant et latéraux inclinés pour éviter de s'accrocher aux obstacles
- Installation facile avec du matériel zingué résistant à la rouille
Fits great front skid plate needs some trimming to fit with off road bumber
Other than a very slight contact with the heat shield on a component of the exhaust system (which I was able to nip with my M12 oscillating tool), and some contact with the exhaust pipe, which I was able to eliminate using a couple of flat washers, the installation process was very self-explanatory and straightforward. Great safety factor for peace of mind regarding the fuel tank! Thank you for fabricating these great skid plates!
Hello,
We're glad to hear you like them. We have ran into this issue with it contacting the exhaust as well and are working on including this into our install instructions. Our goal with our skid plates is too provide the most coverage possible we felt it was worth the small trim if we have better coverage all around. Thank you for the review and please let us know if you need anything else!
I should have bought this when I bought the front skid plate. I recommend using a lift for easier handling and to get those 2 subframe bolts out, I couldn't do it under ramps so took where I could get some lift time but was also installing my lift so 3.5 hors total but the plate too like 20 minutes. Installed on 2018 Crosstrek.
Excellent product
Subaru dealer did a good installation. Had them put thread locker on the bolts and torque them to 30Nm. Bent up the left rear corner of the skid plate when it landed on a rock. I think the left Subaru splash shield got bent also. Not sure the thicker skid plate would have made any difference. At least I didn't hit the transmission pan, again. Would like to put on larger diameter tires but my Subaru Service Advisor says Eysight can not be calibrated to accomodate more ground clearance. Guess I'll just continue hit the rocks and bend the skid plate some more. I used to use 1/8 inch thick steel boiler plate for skid plates on my dune buggy. Probably bends less than aluminum. I think my Wilderness could handle the increased weight. If you fabricate one I volunteer to stress test it for you.
Love the build of it and the install was very straightforward
Was easy to put on and fits good
Total Protection Package - Fits 20-25 Subaru Outback & Wilderness
I purchased the three piece set and the trans plate started to make loud cracking stress noises. Removed and replaced flat on floor as directed by Ralitek. Still creaks and pings over every bump. Front and diff are OK but I had to remove Trans plate so now I have an expensive piece of scrap metal in my garage. Cannot recommend Trans plate. Others are okay.
Hello,
We're sorry you were not satisfied with the transmission skid plate. We've sold hundreds of these skid plates and have them on 4 of our company vehicles including our 2024 Crosstek Wilderness. We have not ran into this issue on our 2024 Crosstrek Wilderness but have had it happen on our 2021 Outback. When it happened on our Outback we found the skid plate was binding up as the chassis was trying to flex over bumps and uneven road. Once we un-torqued and re-torqued the bolts with the vehicle on the ground it went away and hasn't happened since. It seems to be an issue with the procedure of it being installed and or something about your vehicle specifically that is causing the issue. We've only heard a couple times of this issue over the years of selling this skid plate so there has too be something unique about your instance or scenario causing for the issue.
We loved it and so did our customer!
Small Glitch wit Fitment of Under Pan Only One Hole would align with the 4 predrilled holes.I re-drilled out the 4 holes 1/16" of an inch. Quality of workmanship and material The best.
Hi there! Thank you for taking the time to leave a review for our Transmission Skid Plate. We're glad to hear that it provided good protection for your Subaru Crosstrek. We apologize for any inconvenience with the fitment of the under pan. Our team will make note of this and work towards improving it in the future. Nonetheless, we're happy to hear that the quality of workmanship and material met your expectations. Thank you for choosing our product. Have a great day!
The quality of the product is very good. You may lose a bit of clearance but the advantage of having armor is clear once you install the plate. I had to ream the rear hole 1/8" for the bolt to center on the threads. Be prepared with a file or drill.
Thomas apricate the feedback. We will evaluate the tolerances on the bolt holes of the skidplate and check manufacturing docs with QC. Please keep in mind when installing anything large with multiple mounting points it is best to just start the bolts finger loose, this allow for some fitment and fine adjustment before tightening down the bolts. Thank you one again for the feedback and support. Team Rallitek
Good stuff excellent protection, thank you very much
Transmission Skid Plate - Fits 18-23 Subaru Crosstrek
Fitment is easy and great and provides much needed protection
Who will do the installation and what will be the total cost of the installation of the Underbody Protection Package?
We can do the installation as well as any of our dealers listed on our dealer map. Price will vary depending on the place you go and their hourly rate. You can find your nearest RalliTEK dealer by following the link below.
Garantie à vie
Conçu | Assemblé | Fabriqué Aux États-Unis
