I personally love these Skid Plates and the protection I have now. I have had some very loud hits on the bottom that surely would've cooked me if I didn't have the Skids.

While these skids are 1/8th" (Thinner than other brands), The quality is great, and they are very lightweight (17ish lbs).

Honest:
- I have a couple deformities now, bends and dents that could have been prevented with a thicker plate.
- I wish I had the dome washers, they look nice but also would have prevented one of my bolts from almost getting shaved off by a rock.

Install is very easy! They are light so you can hold with one hand and install solo but recommend having another person for EASIER install and take offs.
I kept and cutout the side portions of the oem plastic skid plate (with cutters) so that it prevents mud kickup in the engine bay areas.

I am lifted 1.5" (now 2.5" with my new Rallitek springs) so I can use jacks or just squeeze under the car. I change my oil through the cutout and installed Fumuto Valve for easier maintenance.

Looks really nice and doesn’t take away from ground clearance in any noticeable way.

Super easy to install and feels very effective on off road situations

I have the 6MT (not CVT) so the whole cut opening is no where near the tranny drain plug lol might have to create one of my own I suppose.. Also the new bolts aren't as seemlessly installed as desired... though cross threading was avoided they definitely dont move through the threads like the oem bolts. also does bring your ground clearance down by an inch or so since the plate hangs lower than even the stock engine skid plate. I haven't yet installed the engine one as I am waiting on dome washers and plan on also cutting the stock plastic skid plate to remain in places that are uncovered by the Rallitek plate.

Looks good and nice fit up. Some of the bolts didn't fit right with the dome washers but called RalliTek and they took care of the issues with professionalism. Very satisfied just one thing though, should be a catalog with the purchase. Thanks again guys

The RalliTek skid plates for my 2021 Subaru Crosstrek Sport were very easy to install. Installation of the skid plates took less than an hour, but removing the OEM plastic splash guard was the only hard part. Those plastic clips were a pain to remove.

I had mistakenly ordered the wrong rear diff plate skid, but RalliTek support got me straightened out quickly, and shipped the correct part as soon as I returned the first unit. Great support, and the product is very well engineered!

The bolts supplied with the skid plates were not long enough to bolt them to the car. If they were used would have only been held on by one or two threads, so not very strong or secure. What I did to correct this and install them was cut all the spacers on the engine plate shorter to pull the plate up slightly closer and get enough bolt length. so the bolts either need to be slightly longer or the spacers should be slightly shorter. I didnt have longer bolts so i cut it and made it happen. it took more customizing than it should have tho. they look awesome and seem strong. I cut up my stock plastic cover so I could retain the sides of the engine cover.

RalliTEK Front Skid Plate & Transmission Skid Plate Kit - Fits Subaru Crosstrek 2018-2022

No complaints. Works like a charm!

Couldn't be happier with the skid plates on the Crosstrek.