Ensemble de plaques de protection de soubassement - Compatible avec Subaru Crosstrek Wilderness 2024-2026
Notre ensemble de plaques de protection de soubassement pour la Subaru Crosstrek Wilderness 2024-2026 comprend nos plaques de protection de moteur, de transmission et de différentiel. Cet ensemble de protection tout-terrain à triple protection forme un kit de protection de soubassement très durable avec une surface de couverture beaucoup plus grande que les autres plaques de protection sur le marché. Ces plaques de protection de soubassement protégeront votre Subaru des dommages coûteux sur sentier et sont très résistantes à la corrosion par rapport aux plaques de protection en acier.
Ces plaques de protection en aluminium Subaru sont fièrement fabriquées aux États-Unis et sont la protection de soubassement la plus durable sur le marché. Notre conception de plaque de protection est un système boulonné qui s'intègre parfaitement au soubassement de votre véhicule pour un ensemble de blindage presque impénétrable. Avec ce blindage Subaru, vous pouvez vous concentrer sur le sentier à venir au lieu de vous soucier des dommages au véhicule. Lorsque vous ajoutez une suspension tout-terrain à votre Subaru pour être plus capable d'aventure plus loin, les pièces de blindage RalliTEK sont obligatoires à ajouter à votre véhicule.
- Plaques de protection de moteur, de transmission et de différentiel
- Conception entièrement boulonnée, sans découpe ni perçage
- Fabriqué en aluminium haute résistance de 1/8 po d'épaisseur
- Couverture maximale du soubassement par rapport aux autres conceptions
- Protection accrue dans les zones de frappe courantes
- Peu ou pas de perte de garde au sol
- Soutenu par une garantie à vie
- Fabriqué aux États-Unis
Nos plaques de protection RalliTEK sont fièrement fabriquées et testées aux États-Unis !
Like everything Rallitek makes, this is a top notch product. These skid plates completed my armor. I now have engine, transmission, gas tank and rear diff skid plates, along with rock sliders. Out of all the skid plates, these are by far the trickiest to install. There's absolutely nothing wrong with them or Rallitek's instructions (sort-of), but with the 2 middle bolts, spacers and nuts, there's nearly zero room to hold everything to get it tightened down. Despite the instructions, I ended up starting with the middle bolts and then doing the two easy front bolts. I used electrical tape to hold the nut and spacer to the hanger, then began the tedious process of tightening the bolt. The other point of frustration (again, not Rallitek's fault), is the room to work around the rear attachment point on the driver's side skid plate. I hacksawed a wrench to squeeze it back there to tighten down the bolts. The skid plates are super beefy, but you might have to get creative like I did to do the install. My total install time was about 90 minutes.
I would give these 5 stars because I absolutely love them, but I had already purchased the rally light bar and they are not compatible without a significant amount of work. After a couple hours of work fitting, they both are in place nicely. It would be nice if it had a warning about this so you could plan your install time accordingly. Form and function are superb though, worth the work!!
The skid plates were easy it install, even without instructions. They are infinitely better than the OEM guards.
Added the front, transmission, and rear diff skid plates. Easy install. A must have upgrade for any trail enthusiasts. I look forward to adding the sliders next.
Easy to install looks and works great
Great product easy to install and can take a hit. After install I took a trip in the wilderness outback bottomed out at about 30 MPH on the transmission plate. I felt the impact but no damage to the plat. Hit clay packed with shells and road rubble.
Excellent product, excellent vendor
Excellent craftsmanship. Made in Oregon USA.
Much better coverage than the factory option
Just make sure you follow the directions exactly as stated. It will save you hours.
The install for these is smooth and can be done with simple hand tools. The real test will be Moab!
Send us pictures when you do! I'm glad to hear you like our skid plates! Love to see people out testing and pushing our products to there limits!
Underbody Protection Package - Fits 20-24 Subaru Outback
We’ll thought out but with bad instructions. Seriously needs torque specs.
Thank you for the feedback. We appreciate it and will look into adding this to our instructions for future customers. Please let us know if you have any other questions or concerns.
These fit like a dream and are much better than the plastic covers. Nice hardware and I opted for the rock dome protection washers in Wilderness Gold. Super Happy with look and fitment. They took me about an 1 hour to install in my garage. Instructions were good as well. Couldn't be happier
24 Outback Wilderness/ Easy install. no needed modifications requred
Great products
Just installed the engine, transmission, and differential skid plates. High quality materials and fabrication. Very friendly, responsive and helpful customer service.
Can I do it myself, install time?
You definitely can! Estimated installation time for this package is around 1 - 2 hours.
Is this compatible with the Rally Light Bar? Or will there need to be modifications to make it work?
We have not tested that combo of parts. Most of the time the rally light bars do need some minor notching of the plate to allow for clearance due to the mounting points being the same or close to eachother.
Garantie à vie
Conçu | Assemblé | Fabriqué Aux États-Unis
