Kit de ressorts de rehausse 1/2" - Convient aux Subaru Forester 19-24
Les kits de rehausse de suspension RalliTEK pour Subaru Forester intègrent une technologie propriétaire qui améliore considérablement les performances dans toutes les conditions de conduite pour les Subaru Forester 19-24. Nos ressorts hélicoïdaux linéaires à double taux fourniront la hauteur et la garde au sol nécessaires, ainsi que la possibilité de monter des pneus tout-terrain plus grands et plus agressifs. Nos ressorts de rehausse offrent une combinaison parfaite de performances tout-terrain et sur route.
Ce kit de rehausse Subaru améliorera la maniabilité et la prévisibilité hors route tout en conservant la qualité de conduite souple sur route de Subaru. Grâce à l'installation de la suspension RalliTEK, des pneus plus grands peuvent être montés pour une stabilité accrue par mauvais temps ou sur terrains difficiles. Nos ressorts de rehausse sont aussi à l'aise en montagne, sur un sentier d'overland, dans la neige ou sur les autoroutes. Il n'y a nulle part où votre Subaru Forester rehaussée ne pourra pas vous emmener.
- Rehausse estimée : 1/2"
- Maniabilité et entrée en virage plus réactives
- Angles d'approche et de départ augmentés
- Performance tout-terrain extrêmement améliorée
- Maintien de la qualité de conduite d'origine sur route
- Augmente la capacité de transporter plus de poids sur le véhicule
- Taux de ressort avant : 190 lb/po
- Taux de ressort arrière : 290 lb/po ou 355 lb/po
- Garantie à vie
- Fabriqué aux États-Unis
- Consultez notre Tableau des tailles de pneus
RalliTEK recommande d'effectuer un alignement chaque fois que la suspension ou d'autres composants de direction sont modifiés ou remplacés.
Vous souhaitez un kit de rehausse Subaru complet sur amortisseurs Bilstein ? Voir les ici.
Vous avez encore des questions sur les pièces pour votre Subaru Forester ? Contactez-nous via le chat en direct ou appelez-nous au 503-619-0055.
Installed with stock strut on JDM 2019 Forester.
Personally felt that vehicle rolls lessen during drive despite the height increase. A well balance springs without compromising comfort on road.
Front gain ~2cm
Rear gain ~ 1cm
As above, tightens the ride up to what Subaru SHOULD be oem.
Fit and finish is good.
Install is as expected.
Shipping was fast, but expensive.
However, only about 5mm unladen increase in height (measured) on the rear.
Noticeable in the front.
Notice when you load more than a jacket in the back of your subi or more than just you in the vehicle, it sags and handles different. These springs not only eliminate that, bonus feature, the vehicle handles, turns and feels great. Very taught, sure footed, not harsh best describes it. The springs them selves, physical appearance snd fitment, top class quality. Handles my mtb, rack, gear perfectly.
I have been looking for the way to "slightly" lift my 2019 2.0L Forester that should:
- Involve little or no modifications
- Still fit with stock/OE struts
- Improve overall ride quality
- Give more confidence when tacking moderate offroads, and floods in rainy seasons
- Last long and require no additional maintenance
- Reasonably priced
And these Made-in-USA springs tick all boxes.
Worth the 2-month wait time for int'l shipping (and customs clearance) to Thailand.
Thanks for the review!
Installed with wilderness shocks. Ride is great.
These springs are great! We had loaded up the Forester for a family trip, stuffed the trunk and backseat along with 2 kids in the back, 2 kayaks on the roof and 4 bikes on the back. The OE springs could not handle it and we bounced all the way from NJ to MD and back to NJ. I knew I was going to be buying even prior to that trip but while we were there I ordered these and installed them as soon as we got back and what an amazing difference. No more sagging and bouncing when loaded up👍👍. I was expecting a harsher ride with stiffer springs especially when it's not loaded up but the ride quality is amazing and smooth with better handling and perfect for the little off roading I do. We are probably going to be up sizing to an Ascent and will definitely be making this the first upgrade! Thanks for the quality products Rallitek!
Is this spring same load with stock spring? Pr it more hard than stock?
This spring is a higher spring rate than the stock spring if that's what you're asking. It's about 20% stiffer in the front and 20% stiffer in the rear if you select the sport version or 30% stiffer if you select the overload version.
Garantie à vie
Conçu | Assemblé | Fabriqué aux États-Unis
