Biellettes de barre stabilisatrice arrière réglables robustes - Compatibles avec Subaru Outback 2010-2026
RalliTEK a conçu ces biellettes de barre stabilisatrice arrière HD de remplacement direct pour fonctionner avec des barres stabilisatrices d'origine ou de seconde monte. Fabriquées avec des bagues en polyuréthane durable et un arbre en acier renforcé de 30 %, les biellettes RalliTEK réduisent le mouvement de la barre stabilisatrice.
Caractéristiques :
- Matériau 30 % plus épais que l'original.
- Durée de vie et performances supérieures aux biellettes OEM.
- Remplacement OEM
- Conçu pour des véhicules de hauteur OEM à 1" de rehausse
Les biellettes de barre stabilisatrice d'origine dans le bras de commande arrière de votre Subaru sont fabriquées en caoutchouc souple. Avec le temps, le caoutchouc s'affaiblit, permettant un "jeu" plus important dans la suspension arrière. RalliTEK a remarqué que les biellettes d'origine étaient un peu faibles et ne permettaient pas d'ajustement pour les véhicules surélevés ou abaissés. Cela a jeté les bases des exigences de conception. Une biellette HD de remplacement direct qui fonctionnera avec des barres stabilisatrices d'origine ou de seconde monte à différentes hauteurs de caisse. Les performances devaient être suffisamment précises pour la piste et suffisamment solides pour affronter les sentiers.
Les biellettes robustes RalliTEK HD sont conçues pour durer et surpasser les biellettes de barre stabilisatrice d'origine.
Les biellettes RalliTEK HD sont dotées d'un matériau 30 % plus rigide que l'original, d'une construction en alliage d'acier, d'une rotule en acier poli (et non en plastique comme l'original) et d'une longueur réglable pour obtenir l'angle de barre parfait à n'importe quelle hauteur de caisse. Elles constituent un ajout parfait lors de la mise à niveau de vos barres stabilisatrices ou lors d'un changement de hauteur de caisse.
great design overall and well packaged. The supplied grease was just the right amount to lubricate the bushings and inner crush tube of the lower mount. I recommend folks anti-seize both end studs before installing into the turnbuckle or wrap it up with silicone tape after height is adjusted. I do think two washers should be supplied for each endlink in order to properly secure the top side ball joint to the swaybar arms and spread the load. The stud stop was of very small diameter and may not clamp well on some swaybar arms that have oversized holes.
These work perfectly on my 2024 Legacy for my new Whiteline rear sway bar. Giving 4 stars due to the face that the adjustment jam nuts and the endlink bolt do not hold their place well and REQUIRE threadlocker to stay in place.
Great endlinks to adjust your sway bar.
Heavy Duty Rear Adjustable Endlinks - Fits 2009-2018 Subaru Forester
Easy to configure and adjust, look great. Worked perfect even with 2 inch spacers and .5 inch overload springs. Highly recommend
Great fit
Super heavy duty love rallitek
loved these for the time I had them and were easy to install. Had a local offroad shop install them. rear passenger one failed while on the highway. completely stripped out the bottom bolt in the aluminum part and separated. ive got it rigged right now as it still had a few good threads in them untill stock ones come in the mail.
Hello Joey,
We're sorry to hear this. We have a lifetime warranty on our parts so if you could please file for the warranty using the link below we can get you taken care of!
Installed easily, sturdy and superior alternative to the OEM rear end links. Used a medium thread locker to add vibration resistance. Easy to torque and adjust.
Wanted to get the backend of the Outback tightened up a bit. I purchased a STI rear Sway bar. went to install and noticed end links were torn order the HD Rear End Links for the adjustability. Installed easily, boy Howdy was this the right combo. Went 2mm less than the OEM height of the link.
Easy to install and adjustable for perfect fitment .. grease was supplied for poly bushing on bottom half of end link ..
Great replacement part vs.OEM
Extremely high quality product 😮💨👌
I was just checking my rear suspension today, as i try to do atleast every 6 months. Today i noticed the driver's side HD rear adjustable endlink had failed. Somehow the threads on the lower half of the middle tension nut had been worn to failure. And the boots on both left and right are cracked. Iam removing them and waiting to see what rallitek wants to do about the warranty.
Heavy Duty Rear Adjustable Endlinks - Fits 2010-2019 Subaru Legacy & Outback/2008-2021 WRX & STI/2009-2018 Forester/More
I have really enjoyed the improvements these made and the quality is top notch!
Garantie à vie
Conçu | Assemblé | Fabriqué aux États-Unis
