Skip to product information
1 of 5


Heavy Duty Rear Adjustable Endlinks - Fits 2010-2024 Subaru Outback

Heavy Duty Rear Adjustable Endlinks - Fits 2010-2024 Subaru Outback


Regular price $119.70 USD
Regular price Sale price $119.70 USD
Sale Sold out
Shipping calculated at checkout.

RalliTEK engineered these direct replacement rear HD endlinks to work with factory or aftermarket sway bars. Made out of durable polyurethane bushing, and a steel shaft that was increased by 30%, the RalliTEK endlink provides less movement among the sway bar.



  • 30% thicker material than the factory.
  • Outlast and outperform OEM links.
  • OEM replacement
  • Designed for OEM height to 1" Lift Vehicles

The product contains 2 rear endlinks

Includes lubricant

The factory endlinks in your Subaru's rear control arm are made out of soft rubber. Over time the rubber becomes weak allowing more "slack" in the rear suspension. RalliTEK noticed that the factory endlinks were a little weak and didn't allow adjustment for raised or lowered vehicles. This laid the foundation for the design requirements. A direct replacement HD endlink that will work with factory or aftermarket sway bars at different ride heights. Performance needed to be precise enough for the track and strong enough to take on the trail.


RalliTEK HD heavy-duty endlinks are designed to outlast and outperform your factory sway bar endlinks.


RalliTEK HD endlinks features, material 30% more rigid than factory, steel alloy construction, polished steel ball and socket(not plastic like factory), and adjustable length to dial in the perfect bar angle at any ride height. These are a perfect addition when upgrading your sway bars or when changing your ride height.


Install Difficulty

See Install Difficulty Guide for more info

Est. Install Time -

2 Hours
View full details

Collapsible content

What's in the Box

x2 RalliTEK Adjustable Endlinks

Warranty Information


RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

      NOTE: This warranty is only available within the United States or Canada

  • This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
  • This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.


Non-RalliTEK branded products do not have any written or implied warranties. Products on are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.


Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.

Installation Instructions


2010-2024 Subaru Outback

Customer Reviews

Based on 8 reviews
Just what I needed

Wanted to get the backend of the Outback tightened up a bit. I purchased a STI rear Sway bar. went to install and noticed end links were torn order the HD Rear End Links for the adjustability. Installed easily, boy Howdy was this the right combo. Went 2mm less than the OEM height of the link.

Troy S.
Very nice !

Easy to install and adjustable for perfect fitment .. grease was supplied for poly bushing on bottom half of end link ..
Great replacement part vs.OEM


Extremely high quality product 😮‍💨👌

Cheyenne b.
worked well for about 6-8 months

I was just checking my rear suspension today, as i try to do atleast every 6 months. Today i noticed the driver's side HD rear adjustable endlink had failed. Somehow the threads on the lower half of the middle tension nut had been worn to failure. And the boots on both left and right are cracked. Iam removing them and waiting to see what rallitek wants to do about the warranty.

Josh N.
Great design, but poor rubber

I really wanted to like these, but the rubber boot fails very quickly. I've had my OEM ones on for 2-3 years, and replaced them with these. Nothing was wrong with the OEM, just wanted to try these. Within 6-8 months, I noticed the rubber was tearing and falling apart. Ended up putting my OEMs back one