Skip to product information
1 of 5

ATP GT35R EWG Turbo - WRX 2002-2007 - STI 2004-2007

ATP GT35R EWG Turbo - WRX 2002-2007 - STI 2004-2007

Regular price $2,074.80 USD
Regular price Sale price $2,074.80 USD
Sale Sold out

The Garrett GT Ball-Bearing GT35R (aka GT3582R aka GT35/40R), the ultimate 600+ HP capable dual ball-bearing turbo, is now available in a drop-in package for the Subaru WRX/STi! The turbo assembly takes no more than 1-2 hours to install in place of the stock journal-bearing VF turbo, which is made possible by a high-flowing GT-inspired ATP exhaust housing and a series of custom-engineered components built to suit the installation.

Each GT drop-in turbo package consists of a Garrett factory-assembled and high speed balanced dual ball-bearing CHRA which is then assembled into a set of CNC machine-ported housings that have been optimized in every aspect for maximum flow and efficiency.

All accompanying oil and coolant supply components included in each kit have been designed to properly and seamlessly bridge the Garrett GT turbo to the EJ engine so that the fit is as close to OEM as possible.


Just bolt the turbo on, add fueling and a good tune, and prepare for a blast of acceleration. Garrett GT turbos offer more than just peak HP numbers. These GT turbos offer more torque area under the power curve and more accessible power than any other turbos series out there.


We do recommend that you complement your GT bolt-on turbo with a high-flowing bellmouth downpipe and a high-flowing inlet pipe to effortlessly channel air in and out of the turbo. Although every bolt-on GT turbo ships with a 3" inlet, we do provide a stepdown sleeve just in case you're forced to use the stock 2.25" inlet hose. However, turbos, especially higher-flowing units, love as much inlet flow as possible. This promotes both quicker spoolup and better HP, with less boost pressure at the manifold. The 3" downpipe and bigger inlet is critical for reaching peak efficiency on the GT turbo.


The GT3582R is a great power-maker on the 2.5L that still has great spoolup, especially if you're looking for best area under the power curve possible but still need a lot of power in the high revs. The GT3582R makes boost about 200 to 300 rpms later than the GT3076R but keeps pumping where the GT3076R starts to run out after 500HP. A lot of boost is available even at low to medium throttle. Dual ball-bearings means some boost is always there even if you are lugging the engine. Boost recovery between gearshifts is awesome, with full boost ready even before the upshift is complete as the car lurches forward with sheer enthusiasm at the onset of each gear. The 2.0L driver should not rule out the use of the GT3582R if his/her HP target is in the same range. This competition-grade turbo is still a favorite for this HP range because it hits like a hammer while other 600HP turbos are still spooling up.


This turbo is just like the GT35R kit ATP-SUB-005, except with a built-in flange for a Tial 44mm wastegate on the turbine housing. High flow, less exhaust backpressure, more precise boost control, and even more power! Tial 44mm wastegate and dump tube sold separately.

View full details

Collapsible content


What's in the Box


Installation Instructions


Subaru Impreza WRX Base - 2002
Subaru Impreza WRX Base - 2003
Subaru Impreza WRX Base - 2004
Subaru Impreza WRX Base - 2005
Subaru Impreza WRX Base - 2006
Subaru Impreza WRX Base - 2007
Subaru Impreza WRX STI Base - 2004
Subaru Impreza WRX STI Base - 2005
Subaru Impreza WRX STI Base - 2006
Subaru Impreza WRX STI Base - 2007