{"title":"Spacer \u0026 Suspension Lift Kits","description":"\u003cp data-start=\"37\" data-end=\"511\"\u003eLifting your Subaru isn’t just about height; it’s about how you plan to use it. If you’re looking for a straightforward way to gain ground clearance and fit larger tires while maintaining the factory ride characteristics, a spacer lift is often the most practical choice. It’s a cost-effective solution that delivers the visual presence and extra clearance most daily drivers and light adventurers are after, without dramatically changing how the vehicle feels on the road.\u003c\/p\u003e\n\u003cp data-start=\"513\" data-end=\"1015\"\u003eFor those building something more purpose-driven, adding armor, racks, recovery gear, or spending serious time off pavement. A full suspension lift offers more than just elevation. Upgraded springs and dampers improve control, ride quality, and load handling, giving the vehicle the support it needs when weight and terrain demands increase. While it represents a larger investment and a more involved installation, the performance benefits are noticeable both on the highway and deep into the trail.\u003c\/p\u003e\n\u003cp data-start=\"1017\" data-end=\"1244\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eWhether your goal is a subtle lift for everyday adventure or a fully outfitted overland setup, this collection brings all of your lift options into one place so you can choose the system that aligns with how you actually drive.\u003c\/p\u003e\n\u003c!----\u003e","products":[{"product_id":"1-2-aluminum-front-lift-kit-spacers-fits-2002-2007-subaru-wrx-sti","title":"1\/2\" Aluminum Front Lift Kit Spacers - Fits 2002-2007 Subaru WRX \u0026 STI","description":"\u003ch1\u003e\u003cspan style=\"font-size: 20px;\"\u003e1\/2\" Aluminum Front Lift Kit Spacers - Fits 2002-2007 Subaru WRX \u0026amp; STI\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Front Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43073230340338,"sku":"RTEK-830-414-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-414-000.png?v=1751383196"},{"product_id":"1-2-aluminum-front-lift-kit-spacers-fits-2013-2017-subaru-crosstrek","title":"1\/2\" Aluminum Front Lift Kit Spacers - Fits 2013-2017 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e1\/2\" Aluminum Front Lift Kit Spacers - Fits 2013-2017 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Front Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43073233617138,"sku":"RTEK-830-514-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-514-000.png?v=1751383195"},{"product_id":"1-2-aluminum-rear-lift-kit-spacers-fits-1998-2008-subaru-forester","title":"1\/2\" Aluminum Rear Lift Kit Spacers - Fits 1998-2008 Subaru Forester","description":"\u003cdiv class=\"Polaris-Popover__ContentContainer\"\u003e\n\u003cdiv class=\"Polaris-Popover__Content Polaris-Popover__Content--fluidContent\" id=\":rcmp:\"\u003e\n\u003cdiv data-polaris-scrollable=\"true\" class=\"Polaris-Popover__Pane Polaris-Scrollable Polaris-Scrollable--vertical Polaris-Scrollable--horizontal Polaris-Scrollable--scrollbarWidthThin\"\u003e\n\u003cdiv class=\"_PopoverContainer_1o103_1\"\u003e\n\u003cdiv data-polaris-scrollable=\"true\" class=\"Polaris-Popover__Pane Polaris-Scrollable Polaris-Scrollable--vertical Polaris-Scrollable--horizontal Polaris-Scrollable--scrollbarWidthThin\"\u003e\n\u003cdiv class=\"_Container_1kcqz_1\"\u003e\n\u003cdiv class=\"_Vertical_1kcqz_9\"\u003e\n\u003cdiv class=\"_VerticalLayout_tmqkl_40\"\u003e\n\u003cdiv aria-live=\"polite\" class=\"_OutputSection_tmqkl_1\"\u003e\n\u003cdiv class=\"_ContentWrapper_tmqkl_19\"\u003e\n\u003cdiv data-polaris-scrollable=\"true\" class=\"_Content_tmqkl_19 _VerticalContent_tmqkl_45 Polaris-Scrollable Polaris-Scrollable--vertical Polaris-Scrollable--horizontal Polaris-Scrollable--scrollbarWidthThin\"\u003e\n\u003cdiv class=\"Polaris-Box\"\u003e\n\u003cdiv class=\"Polaris-InlineStack\"\u003e\n\u003cdiv class=\"_TextOutput_zc9gg_1\"\u003e\n\u003cdiv class=\"_HtmlText_zc9gg_37 _Vertical_zc9gg_21\"\u003e\n\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e1\/2\" Aluminum Rear Lift Kit Spacers - Fits 1999-2008 Subaru Forester\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Front Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43073233649906,"sku":"RTEK-830-424-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/900000-4_17692444-8623-4e2c-8eba-ba085514c429.png?v=1751383193"},{"product_id":"1-2-aluminum-rear-lift-kit-spacers-fits-10-26-subaru-outback-wilderness","title":"1\/2\" Aluminum Rear Lift Kit Spacers - Fits 10-26 Subaru Outback \u0026 Wilderness","description":"\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e1\/2\" Aluminum Rear Lift Kit Spacers - Fits 10-26 Subaru Outback \u0026amp; Wilderness\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Rear Spacers\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eCorrosion-Resistant Hardware\u003c\/li\u003e\n\u003cli\u003eAll Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43073233748210,"sku":"RTEK-830-624-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-624-000.png?v=1751383192"},{"product_id":"1-2-aluminum-rear-lift-kit-spacers-fits-2000-2009-subaru-outback-legacy","title":"1\/2\" Aluminum Rear Lift Kit Spacers - Fits 2000-2009 Subaru Outback \u0026 Legacy","description":"\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e1\/2\" Aluminum Rear Lift Kit Spacers - Fits 2000-2009 Subaru Outback \u0026amp; Legacy\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Front Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDoes Not Fit Spec B\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43073813872882,"sku":"RTEK-830-524-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-524-000.png?v=1774896990"},{"product_id":"1-2-aluminum-rear-lift-kit-spacers-fits-1989-1994-subaru-legacy","title":"1\/2\" Aluminum Rear Lift Kit Spacers - Fits 1989-1994 Subaru Legacy","description":"\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Rear Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074545910002,"sku":"RTEK-830-024-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-024-000.png?v=1751383121"},{"product_id":"1-1-2-lift-kit-spacers-w-alignment-correction-fits-2018-2023-subaru-crosstrek","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2018-2023 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 2018-2023 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eRalliTEK 1-1\/2 inch lift kit for the 18-23 Subaru Crosstrek is the easiest way to lift your Crosstrek and fit larger more aggressive off-road tires. The addition of larger tires improves performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan\u003eSubaru lift kit\u003c\/span\u003e\u003cspan\u003e increases \u003c\/span\u003e\u003cspan\u003eground clearance\u003c\/span\u003e\u003cspan\u003e, while the built-in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation, your \u003c\/span\u003e\u003cspan\u003elifted Subaru\u003c\/span\u003e\u003cspan\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan\u003espacer lift kit\u003c\/span\u003e\u003cspan\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan\u003ecoil spring spacer\u003c\/span\u003e\u003cspan\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder-coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan\u003estrut spacer\u003c\/span\u003e\u003cspan\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan\u003elift kits\u003c\/span\u003e\u003cspan\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLift height: 1-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eWant an even better ride? Pair our lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"No","offer_id":47270319620338,"sku":"RTEK-100066","price":769.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":47270319653106,"sku":"RTEK-100066 + RTEK-100556","price":869.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/crosstrek-lift-spacer-kit_1.png?v=1752000056"},{"product_id":"2-suspension-lift-kit-spacers-fits-18-24-subaru-crosstrek","title":"2\" Suspension Lift Kit Spacers - Fits 18-23 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits 18-23 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2-inch lift kit for the 18-23 Subaru Crosstrek is the easiest way to lift your Crosstrek and fit larger more aggressive off-road tires. The addition of larger tires improves performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built-in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation, your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder-coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/avDOJPfDtgQ?si=FLlaZnQ2upQADOdW\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"No","offer_id":43274329293042,"sku":"RTEK-100067","price":819.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":45200550658290,"sku":"RTEK-100067 + RTEK-100556","price":939.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/crosstrek-lift-spacer-kit.png?v=1752000148"},{"product_id":"1-ez-install-front-steel-lift-kit-spacers-fits-2018-2023-subaru-crosstrek","title":"1\" Ez-Install Front Steel Lift Kit Spacers - Fits 2018-2023 Subaru Crosstrek","description":"\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Necessary Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eEasy Install with Clocked Mounting Holes, No Need to Remove Factory Studs!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits are ideal for lifting your vehicle without disturbing the factory ride quality.  \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074597191922,"sku":"RTEK-100069","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29209.jpg?v=1751383077"},{"product_id":"rallitek-1-5-lift-kit-spacers-w-alignment-correction-outback-2015-2019","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2015-2019 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 2015-2019 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074598076658,"sku":"RTEK-100070","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29210.jpg?v=1751383075"},{"product_id":"2-suspension-lift-kit-spacers-fits-15-19-subaru-outback","title":"2\" Suspension Lift Kit Spacers - Fits 2015-2019 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits 2015-2019 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 15-19 Subaru Outback is the easiest way to lift your Outback and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074598928626,"sku":"RTEK-100071","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29211.jpg?v=1751383073"},{"product_id":"rallitek-1-5-lift-kit-spacers-w-alignment-correction-impreza-2008-2016-wrx-sti-2008-2014-forester-2009-2018","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2008-2016 Subaru Impreza\/2008-2014 WRX-STI\/2009-2013 Forester","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 2008-2016 Subaru Impreza\/2008-2014 WRX-STI\/2009-2013 Forester\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074600370418,"sku":"RTEK-100101","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29212.jpg?v=1751383071"},{"product_id":"2-suspension-lift-kit-spacers-fits-13-17-subaru-crosstrek","title":"2\" Suspension Lift Kit Spacers - Fits 13-17 Subaru Crosstrek","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003e13-17 \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003eSubaru Crosstrek\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 13-17 Subaru Crosstrek is the easiest way to lift your Crosstrek and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074601025778,"sku":"RTEK-100102","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29213.jpg?v=1751383069"},{"product_id":"1-aluminum-front-lift-kit-spacers-fits-2003-2006-subaru-baja","title":"1\" Aluminum Front Lift Kit Spacers - Fits 2003-2006 Subaru Baja","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 20px;\"\u003e1\" Aluminum Front Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003e2003-2006 \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003eSubaru Baja\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Front Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074604237042,"sku":"RTEK-830-414-001","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-414-001.png?v=1751383068"},{"product_id":"1-aluminum-front-lift-kit-spacers-fits-2013-2017-subaru-crosstrek","title":"1\" Aluminum Front Lift Kit Spacers - Fits 2013-2017 Subaru Crosstrek","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 20px;\"\u003e1\" Aluminum Front Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 20px;\"\u003e2013-2017 \u003c\/span\u003e\u003cspan style=\"font-size: 20px;\"\u003eSubaru Crosstrek\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Front Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074604466418,"sku":"RTEK-830-514-001","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-414-001.png?v=1751383068"},{"product_id":"1-aluminum-rear-lift-kit-spacers-fits-1998-2008-forester","title":"1\" Aluminum Rear Lift Kit Spacers - Fits 1998-2008 Forester","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 20px;\"\u003e1\" Aluminum Rear Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003e1998-2008 \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003eSubaru Forester\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Rear Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074604499186,"sku":"RTEK-830-424-001","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-424-001.png?v=1751383065"},{"product_id":"1-aluminum-rear-lift-kit-spacers-fits-2013-2023-subaru-crosstrek","title":"1\" Aluminum Rear Lift Kit Spacers - Fits 2013-2023 Subaru Crosstrek","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 20px;\"\u003e1\" Aluminum Rear Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 20px;\"\u003e2013-2023 \u003c\/span\u003e\u003cspan style=\"font-size: 20px;\"\u003eSubaru Crosstrek\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Rear Spacers\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074605908210,"sku":"RTEK-830-624-001","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-624-001.png?v=1751383064"},{"product_id":"1-aluminum-rear-lift-kit-spacers-fits-2000-2009-subaru-outback-legacy","title":"1\" Aluminum Rear Lift Kit Spacers - Fits 2000-2009 Subaru Outback \u0026 Legacy","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 18px;\"\u003e1\" Aluminum Rear Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 18px;\"\u003e2000-2009 \u003c\/span\u003e\u003cspan style=\"font-size: 18px;\"\u003eSubaru Outback \u0026amp; Legacy\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Rear Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074606792946,"sku":"RTEK-830-524-001","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-524-001.png?v=1751383062"},{"product_id":"2-suspension-lift-kit-spacers-fits-10-14-subaru-outback","title":"2\" Suspension Lift Kit Spacers - Fits 10-14 Subaru Outback","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003e10-14 \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003eSubaru Outback\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 10-14 Subaru Outback is the easiest way to lift your Outback and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074609152242,"sku":"RTEK-100104","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29223.jpg?v=1751383055"},{"product_id":"rallitek-1-5-lift-kit-spacers-w-alignment-correction-outback-2010-2014","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2010-2014 Subaru Outback","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 20\u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003e10-2014 \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003eSubaru Outback\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074609512690,"sku":"RTEK-100103","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29224.jpg?v=1751383053"},{"product_id":"1-1-2-rear-lift-kit-spacers-fits-2013-2023-subaru-crosstrek","title":"1-1\/2\" Rear Lift Kit Spacers - Fits 2013-2023 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 20px;\"\u003e1-1\/2\" Rear Lift Kit Spacers - Fits 2013-2023 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan\u003elift spacers \u003c\/span\u003e\u003cspan\u003ecan be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan\u003ecoil spring spacer\u003c\/span\u003e\u003cspan\u003e kit features strut spacers, laser cut for a precise fit, and powder-coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan\u003estrut spacer\u003c\/span\u003e\u003cspan\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan\u003elift kits\u003c\/span\u003e\u003cspan\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eHammered Blue Powdercoat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDoes Not Include Rear Subframe Spacer Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn alignment is required after installation\u003cstrong\u003e.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43389348217074,"sku":"RTEK-100116","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29233.jpg?v=1751383042"},{"product_id":"1-1-2-front-lift-kit-spacers-fits-13-17-subaru-crosstrek","title":"1-1\/2\" Front Lift Kit Spacers - Fits 13-17 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Front Lift Kit Spacers - Fits 13-17 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK front coil spring spacers for the 13-17 Crosstrek are one of the easiest and most economical ways to add a lift to your Crosstrek. Our Subaru lift kit allows you to fit larger tires and increase ground clearance on your vehicle. Spacers can give stock coils added lift or can be paired with lift springs to achieve greater lift heights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese aren’t your average Subaru lift spacers. These strut spacers have some built-in advantages you don’t see anywhere else on the market. Our spring spacers have built in camber and caster correction, a benefit that allows us to lift Subaru vehicles and keep the factory alignment and suspension geometry. This complete bolt-on spacer lift kit will give you the desired aggressive look of a lifted Subaru without the hefty price tag of coilover lift kits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 1-½”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074620063986,"sku":"RTEK-100122","price":208.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/2in-front-lift-spacer-4.png?v=1765296275"},{"product_id":"2-front-lift-kit-spacers-fits-13-17-subaru-crosstrek","title":"2\" Front Lift Kit Spacers - Fits 13-17 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Front Lift Kit Spacers - Fits 13-17 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch front coil spring spacers for the 13-17 Crosstrek are one of the easiest and most economical ways to add a lift to your Crosstrek. Our Subaru lift kit allows you to fit larger tires and increase ground clearance on your vehicle. Spacers can give stock coils added lift or can be paired with lift springs to achieve greater lift heights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese aren’t your average Subaru lift spacers. These strut spacers have some built-in advantages you don’t see anywhere else on the market. Our spring spacers have built in camber and caster correction, a benefit that allows us to lift Subaru vehicles and keep the factory alignment and suspension geometry. This complete bolt-on spacer lift kit will give you the desired aggressive look of a lifted Subaru without the hefty price tag of coilover lift kits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074624389362,"sku":"RTEK-100131","price":208.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/2in-front-lift-spacer-4.png?v=1765296275"},{"product_id":"2-rear-lift-kit-spacers-fits-2008-2026-subaru-impreza-2010-2026-outback-more","title":"2\" Rear Lift Kit Spacers - Fits 2008-2026 Subaru Impreza\/2010-2026 Outback\/More","description":"\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e2\" Rear Lift Kit Spacers - Fits 2008-2026 Subaru Impreza\/2010-2026 Outback\/More\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan\u003elift spacers \u003c\/span\u003e\u003cspan\u003ecan be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan\u003ecoil spring spacer\u003c\/span\u003e\u003cspan\u003e kit features strut spacers, laser cut for a precise fit, and powder-coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan\u003estrut spacer\u003c\/span\u003e\u003cspan\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan\u003elift kits\u003c\/span\u003e\u003cspan\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e2\" Lift Height\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eHammered Blue Powdercoat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDoes Not Include Rear Subframe Spacer Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn alignment is required after installation\u003cstrong\u003e.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074624454898,"sku":"RTEK-100132","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29246.jpg?v=1751383021"},{"product_id":"2-front-lift-kit-spacers-fits-03-08-subaru-forester","title":"2\" Front Lift Kit Spacers - Fits 03-08 Subaru Forester","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Front Lift Kit Spacers - Fits 03-08 Subaru Forester\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch front coil spring spacers for the 03-08 Forester are one of the easiest and most economical ways to add a lift to your Forester. Our Subaru lift kit allows you to fit larger tires and increase ground clearance on your vehicle. Spacers can give stock coils added lift or can be paired with lift springs to achieve greater lift heights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese aren’t your average Subaru lift spacers. These strut spacers have some built-in advantages you don’t see anywhere else on the market. Our spring spacers have built in camber and caster correction, a benefit that allows us to lift Subaru vehicles and keep the factory alignment and suspension geometry. This complete bolt-on spacer lift kit will give you the desired aggressive look of a lifted Subaru without the hefty price tag of coilover lift kits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074624487666,"sku":"RTEK-100134","price":208.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/2in-front-lift-spacer-4.png?v=1765296275"},{"product_id":"1-1-2-front-lift-kit-spacers-fits-10-19-subaru-outback","title":"1-1\/2\" Front Lift Kit Spacers - Fits 10-19 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Front Lift Kit Spacers - Fits 10-19 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK front \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacers\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e for the 10-19 Outback are one of the easiest and most economical ways to add a lift to your Outback. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e allows you to fit larger tires and increase \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e on your vehicle. Spacers can give stock coils added lift or can be paired with \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift springs\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e to achieve greater lift heights.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese aren’t your average Subaru \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift spacers\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e. These \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacers\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e have some built-in advantages you don’t see anywhere else on the market. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espring spacers\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e have built in camber and caster correction, a benefit that allows us to lift Subaru vehicles and keep the factory alignment and suspension geometry. This complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift ki\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003et will give you the desired aggressive look of a \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e without the hefty price tag of \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoilover lift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 1-½”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074624815346,"sku":"RTEK-100135","price":198.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/2in-front-lift-spacer-4.png?v=1765296275"},{"product_id":"1-2-aluminum-spacer-lift-kit-fits-2010-2019-subaru-outback","title":"1\/2\" Aluminum Spacer Lift Kit - Fits 2010-2019 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1\/2\" Aluminum Spacer Lift Kit - Fits 2010-2019 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Front Spacers\u003c\/li\u003e\n\u003cli\u003e1\/2\" Rear Spacers\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074652012786,"sku":"RTEK-100164","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/100164.png?v=1751382915"},{"product_id":"1-aluminum-spacer-lift-kit-fits-2010-2019-subaru-outback","title":"1\" Aluminum Spacer Lift Kit - Fits 2010-2019 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 22px;\"\u003e1\" Aluminum Spacer Lift Kit - Fits 2010-2019 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Front Spacers\u003c\/li\u003e\n\u003cli\u003e1\" Rear Spacers\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074652078322,"sku":"RTEK-100165","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/100165.png?v=1751382914"},{"product_id":"rallitek-super-raised-spring-lift-kit-outback-2015-2019-2-5i","title":"Super Raised Spring Lift Kit - Fits 2015-2019 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003eSuper Raised Spring Lift Kit - Fits 2015-2019 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eR\u003cstrong\u003e\u003cstrong\u003eide Height:\u003c\/strong\u003e\u003c\/strong\u003e \u003c\/strong\u003e+1.5\" FRONT \u0026amp; 2\" REAR LIFT*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Front Springs\u003c\/li\u003e\n\u003cli\u003e0.5\" Front Top Hat Spacers\u003c\/li\u003e\n\u003cli\u003e1\" Rear Springs\u003c\/li\u003e\n\u003cli\u003e1\" Rear Top Hat Spacers\u003c\/li\u003e\n\u003cli\u003e1.5\" Rear Subframe Drop for Alignment Correction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e 215 lb\/in Front \u0026amp; 355lb\/in Rear\u003c\/li\u003e\n\u003cli\u003e18-20% stiffer than OEM\u003c\/li\u003e\n\u003cli\u003eFits with OEM and KYB struts\u003c\/li\u003e\n\u003cli\u003eIncreases street stability and towing capacity\u003c\/li\u003e\n\u003cli\u003eIncreases off-road performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLooking for our spring isolators to keep your springs quiet? \u003ca href=\"https:\/\/www.rallitek.com\/oe-height-springs\/11103-rallitek-spring-isolators.html\"\u003eLook here!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e Minus 0.25\" to front ride height for 3.6R models\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e*Product Disclaimer:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe advertised ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less dependent on your vehicle's trim package, add-ons, or additional modifications. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore about RalliTEK:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRalliTEK’s purpose for their springs is to provide an everyday solution for individuals who commute daily with their vehicle, but also enjoy adventures up to the mountain or country trail for winter sports or summer shenanigans. Springs that would not only solve relevant issues but also improve the vehicle’s ability to perform in different climates around North America.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eRalliTEK springs are designed, built, tested, and supported in Portland, Oregon, USA. A place is known for it's varying climates and terrain. RalliTEK's springs come with guarantees of satisfaction, manufacture warranties, and faster customer support than other off-road spring brands on the market.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eRalliTEK springs are made from chrome silicon spring steel. Chrome silicon spring steel is awesome for conditions involving high stress and for applications where shock or impact loading occurs. Chrome silicon wire can withstand higher and lower temperatures than high-carbon steel wire which makes it an obvious choice for RalliTEK users that make regular mountain trips in the snow and to Mordor. These springs make street driving more fun when unloaded due to the increase in the spring rate. Riding on the trail when loaded with RalliTEK springs makes steering response and tracking much more predictable than with the same weight on factory springs. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Warning:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRalliTEK does not recommend using overload springs with any upgraded rear sway bar unless you also upgrade the front suspension of your vehicle. This is to avoid increased oversteer.\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074652340466,"sku":"RTEK-100168","price":879.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/100168.png?v=1751382911"},{"product_id":"raised-spring-lift-kit-fits-2015-2019-subaru-outback","title":"Raised Spring Lift Kit - Fits 2015-2019 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003eRaised Spring Lift Kit - Fits 2015-2019 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eR\u003cstrong\u003e\u003cstrong\u003eide Height:\u003c\/strong\u003e\u003c\/strong\u003e \u003c\/strong\u003e+1\" FRONT \u0026amp; 1.5\" REAR LIFT*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Front Springs\u003c\/li\u003e\n\u003cli\u003e1\" Rear Springs\u003c\/li\u003e\n\u003cli\u003e0.5\" Aluminum Rear Top Hat Spacers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e 215 lb\/in Front \u0026amp; 355lb\/in Rear\u003c\/li\u003e\n\u003cli\u003e18-20% stiffer than OEM\u003c\/li\u003e\n\u003cli\u003eFits with OEM and KYB struts\u003c\/li\u003e\n\u003cli\u003eIncreases street stability and towing capacity\u003c\/li\u003e\n\u003cli\u003eIncreases off-road performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e*Product Disclaimer:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe advertised ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less, depending on your vehicle's trim package, add-ons, or additional modifications. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore about RalliTEK:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRalliTEK’s purpose for their springs is to provide an everyday solution for individuals who commute daily with their vehicle but also enjoy adventures up to the mountain or country trail for winter sports or summer shenanigans. Springs would not only solve relevant issues but also improve the vehicle’s ability to perform in different climates around North America.\u003c\/p\u003e\n\u003cp\u003eRalliTEK springs are designed, built, tested, and supported in Portland, Oregon, USA. A place is known for its varying climates and terrain. RalliTEK's springs come with satisfaction guarantees, manufacturer warranties, and faster customer support than other off-road spring brands on the market.\u003c\/p\u003e\n\u003cp\u003eRalliTEK springs are made from chrome silicon spring steel. Chrome silicon spring steel is fantastic for conditions involving high stress and for applications where shock or impact loading occurs. Chrome silicon wire can withstand higher and lower temperatures than high-carbon steel wire which makes it an obvious choice for RalliTEK users that make regular mountain trips in the snow and to Mordor. These springs make street driving more fun when unloaded due to the increase in the spring rate. Riding on the trail when loaded with RalliTEK springs makes steering response and tracking much more predictable than with the same weight on factory springs. \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074652930290,"sku":"RTEK-100167","price":482.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/100167.png?v=1751382910"},{"product_id":"2-suspension-lift-kit-spacers-fits-19-26-subaru-ascent","title":"2\" Suspension Lift Kit Spacers - Fits 19-26 Subaru Ascent","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits 19-26 Subaru Ascent\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-end=\"592\" data-start=\"260\"\u003eThe RalliTEK 2-inch lift kit for the 2019-2026 Subaru Ascent is the perfect solution to boost your vehicle’s ground clearance. Allowing you to fit larger and more aggressive stance off-road tires. This complete suspension kit improves traction and performance on and off-road, making your Ascent adventure-ready.\u003c\/p\u003e\n\u003ch4 data-end=\"652\" data-start=\"594\"\u003eFeatures of the RalliTEK Subaru Ascent Lift Kit:\u003c\/h4\u003e\n\u003cul data-end=\"1326\" data-start=\"653\"\u003e\n\u003cli data-end=\"739\" data-start=\"653\"\u003e\n\u003cstrong data-end=\"678\" data-start=\"655\"\u003e2-Inch Lift Height:\u003c\/strong\u003e Increases ground clearance for better off-road capability.\u003c\/li\u003e\n\u003cli data-end=\"865\" data-start=\"740\"\u003e\n\u003cstrong data-end=\"784\" data-start=\"742\"\u003eBuilt-in Caster and Camber Correction:\u003c\/strong\u003e Maintains perfect alignment and factory suspension geometry, even with a lift.\u003c\/li\u003e\n\u003cli data-end=\"990\" data-start=\"866\"\u003e\n\u003cstrong data-end=\"893\" data-start=\"868\"\u003eDurable Construction:\u003c\/strong\u003e Made from 3\/16” MIG welded steel with a hammered blue powder coat for long-lasting durability.\u003c\/li\u003e\n\u003cli data-end=\"1109\" data-start=\"991\"\u003e\n\u003cstrong data-end=\"1015\" data-start=\"993\"\u003eEasy Installation:\u003c\/strong\u003e Bolt-on design fits OEM or lifted springs without dangerous strut disassembly.\u003c\/li\u003e\n\u003cli data-end=\"1239\" data-start=\"1110\"\u003e\n\u003cstrong data-end=\"1148\" data-start=\"1112\"\u003eUSA-Made with Lifetime Warranty:\u003c\/strong\u003e Engineered and manufactured in the USA, backed by a lifetime warranty for peace of mind.\u003c\/li\u003e\n\u003cli data-end=\"1326\" data-start=\"1240\"\u003e\n\u003cstrong data-end=\"1268\" data-start=\"1242\"\u003eIncludes All Hardware:\u003c\/strong\u003e Everything you need for a straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-end=\"1773\" data-start=\"1328\"\u003eWhy Choose a RalliTEK Lift Kit for Your Subaru Ascent?\u003c\/h4\u003e\n\u003cp data-end=\"1773\" data-start=\"1328\"\u003e\u003cbr data-end=\"1389\" data-start=\"1386\"\u003eOur spacer lift kit is laser cut for a precise fit and can be installed directly onto OEM struts and springs or aftermarket lifted springs. The subframe drop maintains your vehicle’s factory alignment, ensuring a smooth and safe ride. Plus, the ability to add larger off-road tires transforms your Ascent into a capable off-road machine, ready to tackle inclement terrain with ease.\u003c\/p\u003e\n\u003cp data-end=\"1773\" data-start=\"1328\"\u003eFor even better handling and enhanced off-road performance, pair our front lift spacers with RalliTEK’s high-quality springs.\u003cstrong data-end=\"1959\" data-start=\"1942\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074654896370,"sku":"RTEK-100203","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29323.jpg?v=1751382892"},{"product_id":"1-1-2-suspension-lift-kit-spacers-fits-19-26-subaru-ascent","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 19-26 Subaru Ascent","description":"\u003ch1\u003e\u003cspan style=\"font-size: 20px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 19-26 Subaru Ascent\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-start=\"260\" data-end=\"592\"\u003eThe RalliTEK 1-1\/2-inch lift kit for the 2019-2026 Subaru Ascent is the perfect solution to boost your vehicle’s ground clearance. Allowing you to fit larger and more aggressive stance off-road tires. This complete suspension kit improves traction and performance on and off-road, making your Ascent adventure-ready.\u003c\/p\u003e\n\u003ch4 data-start=\"594\" data-end=\"652\"\u003eFeatures of the RalliTEK Subaru Ascent Lift Kit:\u003c\/h4\u003e\n\u003cul data-start=\"653\" data-end=\"1326\"\u003e\n\u003cli data-start=\"653\" data-end=\"739\"\u003e\n\u003cstrong data-start=\"655\" data-end=\"678\"\u003e1-1\/2-Inch Lift Height:\u003c\/strong\u003e Increases ground clearance for better off-road capability.\u003c\/li\u003e\n\u003cli data-start=\"740\" data-end=\"865\"\u003e\n\u003cstrong data-start=\"742\" data-end=\"784\"\u003eBuilt-in Caster and Camber Correction:\u003c\/strong\u003e Maintains perfect alignment and factory suspension geometry, even with a lift.\u003c\/li\u003e\n\u003cli data-start=\"866\" data-end=\"990\"\u003e\n\u003cstrong data-start=\"868\" data-end=\"893\"\u003eDurable Construction:\u003c\/strong\u003e Made from 3\/16” MIG welded steel with a hammered blue powder coat for long-lasting durability.\u003c\/li\u003e\n\u003cli data-start=\"991\" data-end=\"1109\"\u003e\n\u003cstrong data-start=\"993\" data-end=\"1015\"\u003eEasy Installation:\u003c\/strong\u003e Bolt-on design fits OEM or lifted springs without dangerous strut disassembly.\u003c\/li\u003e\n\u003cli data-start=\"1110\" data-end=\"1239\"\u003e\n\u003cstrong data-start=\"1112\" data-end=\"1148\"\u003eUSA-Made with Lifetime Warranty:\u003c\/strong\u003e Engineered and manufactured in the USA, backed by a lifetime warranty for peace of mind.\u003c\/li\u003e\n\u003cli data-start=\"1240\" data-end=\"1326\"\u003e\n\u003cstrong data-start=\"1242\" data-end=\"1268\"\u003eIncludes All Hardware:\u003c\/strong\u003e Everything you need for a straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-start=\"1328\" data-end=\"1773\"\u003eWhy Choose a RalliTEK Lift Kit for Your Subaru Ascent?\u003c\/h4\u003e\n\u003cp data-start=\"1328\" data-end=\"1773\"\u003e\u003cbr data-start=\"1386\" data-end=\"1389\"\u003eOur spacer lift kit is laser cut for a precise fit and can be installed directly onto OEM struts and springs or aftermarket lifted springs. The subframe drop maintains your vehicle’s factory alignment, ensuring a smooth and safe ride. Plus, the ability to add larger off-road tires transforms your Ascent into a capable off-road machine, ready to tackle inclement terrain with ease.\u003c\/p\u003e\n\u003cp data-start=\"1328\" data-end=\"1773\"\u003eFor even better handling and enhanced off-road performance, pair our front lift spacers with RalliTEK’s high-quality springs.\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43326416814322,"sku":"RTEK-100202","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29324.jpg?v=1751382890"},{"product_id":"2-front-lift-kit-spacers-fits-18-24-subaru-crosstrek","title":"2\" Front Lift Kit Spacers - Fits 18-23 Subaru Crosstrek","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 24px;\"\u003e2\" Front Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003e18-23 \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003eSubaru Crosstrek\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch front coil spring spacers for the 18-23 Crosstrek are one of the easiest and most economical ways to add a lift to your Crosstrek. Our Subaru lift kit allows you to fit larger tires and increase ground clearance on your vehicle. Spacers can give stock coils added lift or can be paired with lift springs to achieve greater lift heights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese aren’t your average Subaru lift spacers. These strut spacers have some built-in advantages you don’t see anywhere else on the market. Our spring spacers have built in camber and caster correction, a benefit that allows us to lift Subaru vehicles and keep the factory alignment and suspension geometry. This complete bolt-on spacer lift kit will give you the desired aggressive look of a lifted Subaru without the hefty price tag of coilover lift kits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074664104178,"sku":"RTEK-100263","price":219.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/2in-front-lift-spacer-4.png?v=1765296275"},{"product_id":"1-1-2-suspension-lift-kit-spacers-fits-2020-2026-subaru-outback-wilderness","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2020-2026 Subaru Outback \u0026 Wilderness","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 2020-2026 Subaru Outback \u0026amp; Wilderness\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAn alignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074671968498,"sku":"RTEK-100241","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/30058.jpg?v=1751382850"},{"product_id":"2-suspension-lift-kit-spacers-fits-20-26-subaru-outback-wilderness","title":"2\" Suspension Lift Kit Spacers - Fits 20-26 Subaru Outback \u0026 Wilderness","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits 2020-2026 Subaru Outback \u0026amp; Wilderness\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 20-26 Subaru Outback is the easiest way to lift your Outback and fit larger more aggressive off-road tires. The addition of larger tires improves performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074672230642,"sku":"RTEK-100242","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/30057.jpg?v=1751382847"},{"product_id":"2-suspension-lift-kit-spacers-fits-15-21-subaru-wrx-sti","title":"2\" Suspension Lift Kit Spacers - Fits 15-21 Subaru WRX \u0026 STI","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 15-21 Subaru WRX and STI is the easiest way to lift your WRX and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074677735666,"sku":"RTEK-100265","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29350.jpg?v=1751382839"},{"product_id":"rallitek-1-5-lift-kit-spacers-w-alignment-correction-wrx-sti-2015-2021","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2015-2021 Subaru WRX \u0026 STI","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 2015-2021 Subaru WRX \u0026amp; STI\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074677801202,"sku":"RTEK-100264","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29351.jpg?v=1751382837"},{"product_id":"1-1-2-front-lift-kit-spacers-fits-18-24-subaru-crosstrek","title":"1-1\/2\" Front Lift Kit Spacers - Fits 18-23 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Front Lift Kit Spacers - Fits 18-23 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK front spacers for the 18-23 Crosstrek are one of the easiest and most economical ways to add a lift to your Outback. Our Subaru lift kit allows you to fit larger tires and increase ground clearance on your vehicle. Spacers can give stock coils added lift or can be paired with lift springs to achieve greater lift heights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese aren’t your average Subaru lift spacers. These strut spacers have some built-in advantages you don’t see anywhere else on the market. Our spring spacers have built-in camber and caster correction, a benefit that allows us to lift Subaru vehicles and keep the factory alignment and suspension geometry. This complete bolt-on spacer lift kit will give you the desired aggressive look of a lifted Subaru without the hefty price tag of Coilover lift kits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 1-½”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074677932274,"sku":"RTEK-100262","price":208.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/2in-front-lift-spacer-4.png?v=1765296275"},{"product_id":"2-suspension-lift-kit-fits-2008-2011-subaru-impreza","title":"2\" Suspension Lift Kit - Fits 2008-2011 Subaru Impreza","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit - Fits 2008-2011 Subaru Impreza\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eRide Height:\u003c\/strong\u003e +2\" LIFT \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x RalliTEK Subframe Drop Spacer Kit\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Front Lift Kit Spacers 1\" Lift\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Rear Lift Kit Spacers 1\" Lift\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Front \u0026amp; Rear Adjustable Endlinks\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Front Raised Springs 1\" Lift\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Rear Raised Springs 1\" Lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe RalliTEK 2” lift kit for the 2015+ STI features either camber correction after the lift. Factory front arms are adjustable from the factory and do not need to be replaced. When lifting any car over an inch it’s also important to consider sway bar geometry. With RalliTEK adjustable endlinks the factory bar geometry can be retained. In order to keep body roll under control RalliTEK pairs this kit with RalliTEK springs. The spring rates are slightly stiffer than the factory spring rates to counteract the elevated center of gravity due to the lift.\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074681078002,"sku":"RTEK-100273","price":1129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/100252.png?v=1751382831"},{"product_id":"1-1-2-lift-kit-spacers-w-alignment-correction-fits-2014-2018-subaru-forester-xt","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2014-2018 Subaru Forester XT","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 2014-2018 Subaru Forester XT\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074703622386,"sku":"RTEK-100300","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29356.jpg?v=1751382818"},{"product_id":"2-suspension-lift-kit-spacers-fits-14-18-subaru-forester-xt","title":"2\" Suspension Lift Kit Spacers - Fits 14-18 Subaru Forester XT","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits 14-18 Subaru Forester XT\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 14-18 Subaru Forester XT is the easiest way to lift your Forester and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074703982834,"sku":"RTEK-100301","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29357.jpg?v=1751382816"},{"product_id":"2-suspension-lift-kit-15-21-subaru-wrx-sti","title":"2\" Suspension Lift Kit - Fits 2015-2021 Subaru WRX \u0026 STI","description":"\u003ch2\u003e\u003cspan style=\"font-size: 22px;\"\u003e2\" Suspension Lift Kit - Fits 2015-2021 Subaru WRX \u0026amp; STI\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp data-start=\"715\" data-end=\"990\"\u003eTake your 2015+ Subaru STI to the next level with the RalliTEK 2” Lift Kit — engineered for performance, durability, and proper suspension geometry. This complete lift system is designed to deliver true off-road capability while maintaining on-road comfort and control.\u003c\/p\u003e\n\u003cp data-start=\"992\" data-end=\"1213\"\u003eThe RalliTEK Subframe Drop Spacers correct camber, caster, and toe after lifting, keeping your suspension geometry dialed in. The STI’s factory front control arms are already adjustable, so no replacement is needed.\u003c\/p\u003e\n\u003cp data-start=\"1215\" data-end=\"1561\"\u003eTo maintain ideal sway bar alignment and handling, the kit includes RalliTEK adjustable endlinks that restore proper sway bar geometry. The RalliTEK raised springs are tuned with slightly higher spring rates to offset the increased center of gravity from the lift — minimizing body roll and improving stability on and off the trail.\u003c\/p\u003e\n\u003cp data-start=\"1563\" data-end=\"1789\"\u003eWhether you're building a Subaru STI overland rig or just want a more aggressive stance and improved clearance, this RalliTEK lift kit provides the balance of comfort, capability, and performance Subaru enthusiasts demand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRide Height:\u003c\/strong\u003e +2\" LIFT \u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 13px;\"\u003e\u003cspan style=\"font-size: 13px;\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x RalliTEK Subframe Drop Spacer Kit\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Front Lift Kit Spacers 1\" Lift\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Rear Lift Kit Spacers 1\" Lift\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Front Adjustable Endlinks\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Rear Adjustable Endlinks\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Front Raised Springs 1\" Lift\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Rear Raised Springs 1\" Lift \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eWant an even better ride? Pair our springs with Bilstein Struts and Bilstein \u003c\/span\u003e\u003ca href=\"https:\/\/www.rallitek.com\/en\/640-struts\"\u003e\u003cspan\u003eShocks\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e for the ultimate Subaru off-road package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWant a completed Subaru lift kit on Bilstein shocks? See them \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/assembled-struts\/Subaru-WRX-2020\"\u003e\u003cspan\u003ehere.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStill have some questions about parts for your Subaru? Get in touch via live chat or call us now at 503-619-0055.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"No \/ No","offer_id":45503752143090,"sku":"RTEK-100252","price":1129.99,"currency_code":"USD","in_stock":true},{"title":"No \/ Yes","offer_id":45503752175858,"sku":"RTEK-100591","price":1699.99,"currency_code":"USD","in_stock":true},{"title":"Yes (x5 60mm Poly Exhaust Hangers) \/ No","offer_id":45503752274162,"sku":"RTEK-100592","price":1169.99,"currency_code":"USD","in_stock":true},{"title":"Yes (x5 60mm Poly Exhaust Hangers) \/ Yes","offer_id":45503752306930,"sku":"RTEK-100593","price":1769.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/100252.png?v=1751382831"},{"product_id":"2-suspension-lift-kit-fits-2008-2014-subaru-wrx-sti","title":"2\" Suspension Lift Kit - Fits 2008-2014 Subaru WRX \u0026 STI","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit - Fits 2008-2014 Subaru WRX \u0026amp; STI\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eRide Height:\u003c\/strong\u003e +2\" LIFT \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x RalliTEK Subframe Drop Spacer Kit\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Front Lift Kit Spacers 1\" Lift\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Rear Lift Kit Spacers 1\" Lift\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Front \u0026amp; Rear Adjustable Endlinks\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Front Raised Springs 1\" Lift\u003c\/li\u003e\n\u003cli\u003e1 x RalliTEK Rear Raised Springs 1\" Lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe RalliTEK 2” lift kit for the 2008-2014 WRX and STI features either RalliTEK Subframe Drop Spacers camber, caster, and toe correction after the lift. Factory front arms are adjustable from the factory and do not need to be replaced. When lifting any car over an inch it’s also important to consider sway bar geometry. With RalliTEK adjustable endlinks the factory bar geometry can be retained. In order to keep body roll under control RalliTEK pairs this kit with RalliTEK springs. The spring rates are slightly stiffer than the factory spring rates to counteract the elevated center of gravity due to the lift.\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074715222258,"sku":"RTEK-100273","price":1129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/100252.png?v=1751382831"},{"product_id":"2-suspension-lift-kit-spacers-fits-17-23-subaru-impreza","title":"2\" Suspension Lift Kit Spacers - Fits 17-23 Subaru Impreza","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits 17-23 Subaru Impreza\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 17-23 Subaru Impreza is the easiest way to lift your Impreza and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/avDOJPfDtgQ?si=FLlaZnQ2upQADOdW\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43274339877106,"sku":"RTEK-100332","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/crosstrek-lift-spacer-kit.png?v=1752000148"},{"product_id":"1-1-2-lift-kit-spacers-w-alignment-correction-fits-2017-2023-subaru-impreza","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 17-23 Subaru Impreza","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 17-23 Subaru Impreza\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eExtended Exhaust Hangers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43274340073714,"sku":"RTEK-100334","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/rallitek-lift-kit-rtek-100420_52e01c0f-52ce-48ea-98fa-c1f142404ed6.jpg?v=1751382784"},{"product_id":"rallitek-2-lift-kit-forester-2003-2008","title":"2\" Suspension Lift Kit - Fits 2003-2008 Subaru Forester","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit - Fits 2003-2008 Subaru Forester\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eRide Height:\u003c\/strong\u003e Estimated +2\" LIFT \u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 13px;\"\u003e\u003cspan style=\"font-size: 13px;\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e1 x RalliTEK Front Lift Kit Spacers 1\" Lift\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e1 x RalliTEK Rear Lift Kit Spacers 1\" Lift\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e1 x RalliTEK Adjustable Trailing Arm Bracket\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e1 x RalliTEK Front Raised Springs 1\" Lift\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e1 x RalliTEK Rear Raised Springs 1\" Lift \u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e1 x Pair SPC Camber Bolts\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #0d703a;\"\u003ePair of RalliTEK Spring Isolators (YOU DON'T NEED TO ORDER SEPERATLY)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe RalliTEK 2” lift kit for the 2003-2008 Forester is the ultimate parts list to get a 2\" RalliTEK lift so you can clear up to a 235\/75-15 tire*. Our kit includes 1\" RalliTEK top hat spacers front and rear, 1\" RalliTEK raised springs front and rear, our own adjustable trailing arm brackets, and even camber bolts for the rear suspension to make sure you can dial your alignment back to OEM specifications. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*DISCLAIMER\u003c\/strong\u003e: 235\/75-15 tires may require additional wheel spacers in the rear to clear the strut and also some trimming to the fender liners and bumper and also pounding the front pinch welds flat.\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074736226546,"sku":"RTEK-100344","price":891.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/100334.png?v=1751382766"},{"product_id":"rallitek-2-lift-kit-forester-1998-2002","title":"2\" Suspension Lift Kit - Fits 1998-2002 Subaru Forester","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit - Fits 1998-2002 Subaru Forester\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eRide Height:\u003c\/strong\u003e Estimated +2\" LIFT \u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 13px;\"\u003e\u003cspan style=\"font-size: 13px;\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e1 x RalliTEK Front Lift Kit Spacers 1\" Lift\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e1 x RalliTEK Rear Lift Kit Spacers 1\" Lift\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e1 x RalliTEK Adjustable Trailing Arm Bracket\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e1 x RalliTEK Front Raised Springs 1\" Lift\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e1 x RalliTEK Rear Raised Springs 1\" Lift \u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e1 x SPC Camber Bolts\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e2 x KYB Rear Top Hats\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe RalliTEK 2” lift kit for the 1998-2002 Forester is the ultimate parts list to get a 2\" RalliTEK lift so you can clear up to a 235\/75-15 tire*. Our kit includes 1\" RalliTEK top hat spacers front and rear, 1\" RalliTEK raised springs front and rear, our own adjustable trailing arm brackets, and camber bolts for the rear suspension to make sure you can dial your alignment back to OEM specifications. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*DISCLAIMER\u003c\/strong\u003e: 235\/75-15 tires may require additional wheel spacers in the rear to clear the strut and also some trimming to the fender liners and bumper and also pounding the front pinchwelds flat.\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074736324850,"sku":"RTEK-100345","price":996.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/100335.png?v=1751382764"},{"product_id":"2-5-rear-lift-spacers-fits-2008-2026-subaru-wrx-sti-2013-2023-crosstrek","title":"2.5\" Rear Lift Spacers - Fits 2008-2026 Subaru WRX-STI\/2013-2023 Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2.5\" Rear Lift Spacers - Fits 2008-2026 Subaru WRX-STI\/2013-2026 BRZ\/2013-2023 Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-end=\"309\" data-start=\"125\"\u003eThese are our most aggressive rear lift spacers, engineered to correct low rear ride height on vehicles that carry a constant heavy load where overload springs alone aren’t enough.\u003c\/p\u003e\n\u003cp data-end=\"745\" data-start=\"311\"\u003eDesigned for rigs that live under weight, these spacers restore rear ride height and help maintain proper suspension geometry under sustained load conditions. A professional alignment is required after installation, and users should note that the overall center of gravity will be increased. For improved stability and handling—both on- and off-road—we strongly recommend pairing these spacers with a set of RalliTEK rear springs.\u003c\/p\u003e\n\u003ch3 data-end=\"774\" data-start=\"752\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"814\" data-start=\"777\"\u003e3\/16” MIG-welded steel construction\u003c\/li\u003e\n\u003cli data-end=\"814\" data-start=\"777\"\u003eHammered blue powder coat finish\u003c\/li\u003e\n\u003cli data-end=\"814\" data-start=\"775\"\u003e\n\u003cp data-end=\"814\" data-start=\"777\"\u003eAll required mounting hardware included\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"814\" data-start=\"777\"\u003e\u003cstrong\u003eNot recommended for use with rear lift springs unless the vehicle is carrying a constant rear overload of 500 lbs or more.\u003c\/strong\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074788163826,"sku":"RTEK-100412","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29415.jpg?v=1751382705"},{"product_id":"2-front-and-2-5-rear-suspension-lift-kit-fits-19-26-subaru-forester-wilderness","title":"2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 19-26 Subaru Forester \u0026 Wilderness","description":"\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 19-26 Subaru Forester \u0026amp; Wilderness\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis lift spacer kit is designed to alleviate rear end sag on the 19-26 Subaru Forester that are loaded with constant weight and overload springs are not enough. The RalliTEK lift kit for the Forester is the easiest way to lift your vehicle and fit larger, more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront lift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRear lift height: 2-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"No","offer_id":47270198870258,"sku":"RTEK-100413","price":819.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":47270198903026,"sku":"RTEK-100413 + RTEK-100556","price":939.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/crosstrek-lift-spacer-kit.png?v=1752000148"},{"product_id":"2-front-and-2-5-rear-suspension-lift-kit-fits-15-19-subaru-outback","title":"2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 15-19 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 15-19 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis lift spacer kit is designed to alleviate rear end sag on the 15-19 Subaru Outback that are loaded with constant weight and overload springs are not enough. The RalliTEK lift kit for the Outback is the easiest way to lift your vehicle and fit larger, more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront lift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRear lift height: 2-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003eNOT RECOMMENDED FOR USE WITH 0.75\" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074790719730,"sku":"RTEK-100414","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29420.jpg?v=1751382698"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/collections\/backup-collection-410752942322.png?v=1772124083","url":"https:\/\/rallitek.com\/en-ca\/collections\/subaru-lift-kits.oembed?page=10","provider":"RalliTEK","version":"1.0","type":"link"}