{"title":"Lift Spacer Kits","description":"\u003cp\u003e\u003cspan\u003eIf there’s one thing that every off-road vehicle needs before setting out into challenging and punishing terrain, it’s a lift kit. The clearance of the underside of your Subaru is critical when off-roading or overlanding to prevent costly damage and to create enough room for installing larger off-road tires. An economical and simple way to get even more clearance out of your Subaru is a RalliTEK spacer lift kit.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLift spacers are discs that sit on top of the springs in a coil-equipped vehicle like a Subaru. RalliTEK’s lift spacers for trucks and Subarus can add as much as two inches of ground clearance quickly and affordably.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCoil spring spacers are one of the easiest ways to add a lift to your Subaru vehicle, as they can be installed quickly and only cost a fraction of the price for an entire lift kit. RalliTEK’s coil spring spacer lift kit will add the few inches of height you need to navigate challenging off-road terrain while keeping the undercarriage of your Subaru intact.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRalliTEK strut spacers are a minimally invasive solution that won't break the bank whether you need of a leveling kit or a lift over two inches. If you’re ready to add a few inches of height to your Subaru, check out one of RalliTEK’s spacer lift kits below.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"1-2-aluminum-front-lift-kit-spacers-fits-2002-2007-subaru-wrx-sti","title":"1\/2\" Aluminum Front Lift Kit Spacers - Fits 2002-2007 Subaru WRX \u0026 STI","description":"\u003ch1\u003e\u003cspan style=\"font-size: 20px;\"\u003e1\/2\" Aluminum Front Lift Kit Spacers - Fits 2002-2007 Subaru WRX \u0026amp; STI\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Front Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43073230340338,"sku":"RTEK-830-414-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-414-000.png?v=1751383196"},{"product_id":"1-2-aluminum-front-lift-kit-spacers-fits-2013-2017-subaru-crosstrek","title":"1\/2\" Aluminum Front Lift Kit Spacers - Fits 2013-2017 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e1\/2\" Aluminum Front Lift Kit Spacers - Fits 2013-2017 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Front Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43073233617138,"sku":"RTEK-830-514-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-514-000.png?v=1751383195"},{"product_id":"1-2-aluminum-rear-lift-kit-spacers-fits-1998-2008-subaru-forester","title":"1\/2\" Aluminum Rear Lift Kit Spacers - Fits 1998-2008 Subaru Forester","description":"\u003cdiv class=\"Polaris-Popover__ContentContainer\"\u003e\n\u003cdiv class=\"Polaris-Popover__Content Polaris-Popover__Content--fluidContent\" id=\":rcmp:\"\u003e\n\u003cdiv data-polaris-scrollable=\"true\" class=\"Polaris-Popover__Pane Polaris-Scrollable Polaris-Scrollable--vertical Polaris-Scrollable--horizontal Polaris-Scrollable--scrollbarWidthThin\"\u003e\n\u003cdiv class=\"_PopoverContainer_1o103_1\"\u003e\n\u003cdiv data-polaris-scrollable=\"true\" class=\"Polaris-Popover__Pane Polaris-Scrollable Polaris-Scrollable--vertical Polaris-Scrollable--horizontal Polaris-Scrollable--scrollbarWidthThin\"\u003e\n\u003cdiv class=\"_Container_1kcqz_1\"\u003e\n\u003cdiv class=\"_Vertical_1kcqz_9\"\u003e\n\u003cdiv class=\"_VerticalLayout_tmqkl_40\"\u003e\n\u003cdiv aria-live=\"polite\" class=\"_OutputSection_tmqkl_1\"\u003e\n\u003cdiv class=\"_ContentWrapper_tmqkl_19\"\u003e\n\u003cdiv data-polaris-scrollable=\"true\" class=\"_Content_tmqkl_19 _VerticalContent_tmqkl_45 Polaris-Scrollable Polaris-Scrollable--vertical Polaris-Scrollable--horizontal Polaris-Scrollable--scrollbarWidthThin\"\u003e\n\u003cdiv class=\"Polaris-Box\"\u003e\n\u003cdiv class=\"Polaris-InlineStack\"\u003e\n\u003cdiv class=\"_TextOutput_zc9gg_1\"\u003e\n\u003cdiv class=\"_HtmlText_zc9gg_37 _Vertical_zc9gg_21\"\u003e\n\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e1\/2\" Aluminum Rear Lift Kit Spacers - Fits 1999-2008 Subaru Forester\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Front Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43073233649906,"sku":"RTEK-830-424-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/900000-4_17692444-8623-4e2c-8eba-ba085514c429.png?v=1751383193"},{"product_id":"1-2-aluminum-rear-lift-kit-spacers-fits-10-26-subaru-outback-wilderness","title":"1\/2\" Aluminum Rear Lift Kit Spacers - Fits 10-26 Subaru Outback \u0026 Wilderness","description":"\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e1\/2\" Aluminum Rear Lift Kit Spacers - Fits 10-26 Subaru Outback \u0026amp; Wilderness\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Rear Spacers\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eCorrosion-Resistant Hardware\u003c\/li\u003e\n\u003cli\u003eAll Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43073233748210,"sku":"RTEK-830-624-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-624-000.png?v=1751383192"},{"product_id":"1-2-aluminum-rear-lift-kit-spacers-fits-2000-2009-subaru-outback-legacy","title":"1\/2\" Aluminum Rear Lift Kit Spacers - Fits 2000-2009 Subaru Outback \u0026 Legacy","description":"\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e1\/2\" Aluminum Rear Lift Kit Spacers - Fits 2000-2009 Subaru Outback \u0026amp; Legacy\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Front Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDoes Not Fit Spec B\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43073813872882,"sku":"RTEK-830-524-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-524-000.png?v=1774896990"},{"product_id":"1-2-aluminum-rear-lift-kit-spacers-fits-1989-1994-subaru-legacy","title":"1\/2\" Aluminum Rear Lift Kit Spacers - Fits 1989-1994 Subaru Legacy","description":"\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Rear Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074545910002,"sku":"RTEK-830-024-000","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-024-000.png?v=1751383121"},{"product_id":"1-1-2-lift-kit-spacers-w-alignment-correction-fits-2018-2023-subaru-crosstrek","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2018-2023 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 2018-2023 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eRalliTEK 1-1\/2 inch lift kit for the 18-23 Subaru Crosstrek is the easiest way to lift your Crosstrek and fit larger more aggressive off-road tires. The addition of larger tires improves performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan\u003eSubaru lift kit\u003c\/span\u003e\u003cspan\u003e increases \u003c\/span\u003e\u003cspan\u003eground clearance\u003c\/span\u003e\u003cspan\u003e, while the built-in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation, your \u003c\/span\u003e\u003cspan\u003elifted Subaru\u003c\/span\u003e\u003cspan\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan\u003espacer lift kit\u003c\/span\u003e\u003cspan\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan\u003ecoil spring spacer\u003c\/span\u003e\u003cspan\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder-coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan\u003estrut spacer\u003c\/span\u003e\u003cspan\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan\u003elift kits\u003c\/span\u003e\u003cspan\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLift height: 1-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eWant an even better ride? Pair our lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"No","offer_id":47270319620338,"sku":"RTEK-300110","price":769.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":47270319653106,"sku":"RTEK-300111","price":869.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/crosstrek-lift-spacer-kit_1.png?v=1752000056"},{"product_id":"2-suspension-lift-kit-spacers-fits-18-24-subaru-crosstrek","title":"2\" Suspension Lift Kit Spacers - Fits 18-23 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits 18-23 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2-inch lift kit for the 18-23 Subaru Crosstrek is the easiest way to lift your Crosstrek and fit larger more aggressive off-road tires. The addition of larger tires improves performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built-in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation, your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder-coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/avDOJPfDtgQ?si=FLlaZnQ2upQADOdW\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"No","offer_id":43274329293042,"sku":"RTEK-300112","price":819.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":45200550658290,"sku":"RTEK-300113","price":939.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/crosstrek-lift-spacer-kit.png?v=1752000148"},{"product_id":"1-ez-install-front-steel-lift-kit-spacers-fits-2018-2023-subaru-crosstrek","title":"1\" Ez-Install Front Steel Lift Kit Spacers - Fits 2018-2023 Subaru Crosstrek","description":"\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Necessary Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eEasy Install with Clocked Mounting Holes, No Need to Remove Factory Studs!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits are ideal for lifting your vehicle without disturbing the factory ride quality.  \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074597191922,"sku":"RTEK-100069","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29209.jpg?v=1751383077"},{"product_id":"rallitek-1-5-lift-kit-spacers-w-alignment-correction-outback-2015-2019","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2015-2019 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 2015-2019 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074598076658,"sku":"RTEK-300114","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29210.jpg?v=1751383075"},{"product_id":"2-suspension-lift-kit-spacers-fits-15-19-subaru-outback","title":"2\" Suspension Lift Kit Spacers - Fits 2015-2019 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits 2015-2019 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 15-19 Subaru Outback is the easiest way to lift your Outback and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074598928626,"sku":"RTEK-100071","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29211.jpg?v=1751383073"},{"product_id":"rallitek-1-5-lift-kit-spacers-w-alignment-correction-impreza-2008-2016-wrx-sti-2008-2014-forester-2009-2018","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2008-2016 Subaru Impreza\/2008-2014 WRX-STI\/2009-2013 Forester","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 2008-2016 Subaru Impreza\/2008-2014 WRX-STI\/2009-2013 Forester\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074600370418,"sku":"RTEK-300115","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29212.jpg?v=1751383071"},{"product_id":"2-suspension-lift-kit-spacers-fits-13-17-subaru-crosstrek","title":"2\" Suspension Lift Kit Spacers - Fits 13-17 Subaru Crosstrek","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003e13-17 \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003eSubaru Crosstrek\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 13-17 Subaru Crosstrek is the easiest way to lift your Crosstrek and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074601025778,"sku":"RTEK-300116","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29213.jpg?v=1751383069"},{"product_id":"1-aluminum-front-lift-kit-spacers-fits-2003-2006-subaru-baja","title":"1\" Aluminum Front Lift Kit Spacers - Fits 2003-2006 Subaru Baja","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 20px;\"\u003e1\" Aluminum Front Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003e2003-2006 \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003eSubaru Baja\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Front Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074604237042,"sku":"RTEK-830-414-001","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-414-001.png?v=1751383068"},{"product_id":"1-aluminum-front-lift-kit-spacers-fits-2013-2017-subaru-crosstrek","title":"1\" Aluminum Front Lift Kit Spacers - Fits 2013-2017 Subaru Crosstrek","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 20px;\"\u003e1\" Aluminum Front Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 20px;\"\u003e2013-2017 \u003c\/span\u003e\u003cspan style=\"font-size: 20px;\"\u003eSubaru Crosstrek\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Front Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074604466418,"sku":"RTEK-830-514-001","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-414-001.png?v=1751383068"},{"product_id":"1-aluminum-rear-lift-kit-spacers-fits-1998-2008-forester","title":"1\" Aluminum Rear Lift Kit Spacers - Fits 1998-2008 Forester","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 20px;\"\u003e1\" Aluminum Rear Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003e1998-2008 \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003eSubaru Forester\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Rear Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074604499186,"sku":"RTEK-830-424-001","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-424-001.png?v=1751383065"},{"product_id":"1-aluminum-rear-lift-kit-spacers-fits-2013-2023-subaru-crosstrek","title":"1\" Aluminum Rear Lift Kit Spacers - Fits 2013-2023 Subaru Crosstrek","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 20px;\"\u003e1\" Aluminum Rear Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 20px;\"\u003e2013-2023 \u003c\/span\u003e\u003cspan style=\"font-size: 20px;\"\u003eSubaru Crosstrek\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Rear Spacers\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074605908210,"sku":"RTEK-830-624-001","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-624-001.png?v=1751383064"},{"product_id":"1-aluminum-rear-lift-kit-spacers-fits-2000-2009-subaru-outback-legacy","title":"1\" Aluminum Rear Lift Kit Spacers - Fits 2000-2009 Subaru Outback \u0026 Legacy","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 18px;\"\u003e1\" Aluminum Rear Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 18px;\"\u003e2000-2009 \u003c\/span\u003e\u003cspan style=\"font-size: 18px;\"\u003eSubaru Outback \u0026amp; Legacy\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Rear Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074606792946,"sku":"RTEK-830-524-001","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/830-524-001.png?v=1751383062"},{"product_id":"2-suspension-lift-kit-spacers-fits-10-14-subaru-outback","title":"2\" Suspension Lift Kit Spacers - Fits 10-14 Subaru Outback","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003e10-14 \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003eSubaru Outback\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 10-14 Subaru Outback is the easiest way to lift your Outback and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074609152242,"sku":"RTEK-300118","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29223.jpg?v=1751383055"},{"product_id":"rallitek-1-5-lift-kit-spacers-w-alignment-correction-outback-2010-2014","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2010-2014 Subaru Outback","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 20\u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003e10-2014 \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003eSubaru Outback\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074609512690,"sku":"RTEK-300117","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29224.jpg?v=1751383053"},{"product_id":"1-1-2-rear-lift-kit-spacers-fits-2013-2023-subaru-crosstrek","title":"1-1\/2\" Rear Lift Kit Spacers - Fits 2013-2023 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 20px;\"\u003e1-1\/2\" Rear Lift Kit Spacers - Fits 2013-2023 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan\u003elift spacers \u003c\/span\u003e\u003cspan\u003ecan be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan\u003ecoil spring spacer\u003c\/span\u003e\u003cspan\u003e kit features strut spacers, laser cut for a precise fit, and powder-coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan\u003estrut spacer\u003c\/span\u003e\u003cspan\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan\u003elift kits\u003c\/span\u003e\u003cspan\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eHammered Blue Powdercoat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDoes Not Include Rear Subframe Spacer Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn alignment is required after installation\u003cstrong\u003e.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43389348217074,"sku":"RTEK-100116","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29233.jpg?v=1751383042"},{"product_id":"1-1-2-front-lift-kit-spacers-fits-13-17-subaru-crosstrek","title":"1-1\/2\" Front Lift Kit Spacers - Fits 13-17 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Front Lift Kit Spacers - Fits 13-17 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK front coil spring spacers for the 13-17 Crosstrek are one of the easiest and most economical ways to add a lift to your Crosstrek. Our Subaru lift kit allows you to fit larger tires and increase ground clearance on your vehicle. Spacers can give stock coils added lift or can be paired with lift springs to achieve greater lift heights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese aren’t your average Subaru lift spacers. These strut spacers have some built-in advantages you don’t see anywhere else on the market. Our spring spacers have built in camber and caster correction, a benefit that allows us to lift Subaru vehicles and keep the factory alignment and suspension geometry. This complete bolt-on spacer lift kit will give you the desired aggressive look of a lifted Subaru without the hefty price tag of coilover lift kits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 1-½”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074620063986,"sku":"RTEK-100122","price":208.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/2in-front-lift-spacer-4.png?v=1765296275"},{"product_id":"2-front-lift-kit-spacers-fits-13-17-subaru-crosstrek","title":"2\" Front Lift Kit Spacers - Fits 13-17 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Front Lift Kit Spacers - Fits 13-17 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch front coil spring spacers for the 13-17 Crosstrek are one of the easiest and most economical ways to add a lift to your Crosstrek. Our Subaru lift kit allows you to fit larger tires and increase ground clearance on your vehicle. Spacers can give stock coils added lift or can be paired with lift springs to achieve greater lift heights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese aren’t your average Subaru lift spacers. These strut spacers have some built-in advantages you don’t see anywhere else on the market. Our spring spacers have built in camber and caster correction, a benefit that allows us to lift Subaru vehicles and keep the factory alignment and suspension geometry. This complete bolt-on spacer lift kit will give you the desired aggressive look of a lifted Subaru without the hefty price tag of coilover lift kits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074624389362,"sku":"RTEK-100131","price":208.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/2in-front-lift-spacer-4.png?v=1765296275"},{"product_id":"2-rear-lift-kit-spacers-fits-2008-2026-subaru-impreza-2010-2026-outback-more","title":"2\" Rear Lift Kit Spacers - Fits 2008-2026 Subaru Impreza\/2010-2026 Outback\/More","description":"\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e2\" Rear Lift Kit Spacers - Fits 2008-2026 Subaru Impreza\/2010-2026 Outback\/More\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan\u003elift spacers \u003c\/span\u003e\u003cspan\u003ecan be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan\u003ecoil spring spacer\u003c\/span\u003e\u003cspan\u003e kit features strut spacers, laser cut for a precise fit, and powder-coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan\u003estrut spacer\u003c\/span\u003e\u003cspan\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan\u003elift kits\u003c\/span\u003e\u003cspan\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e2\" Lift Height\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eHammered Blue Powdercoat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDoes Not Include Rear Subframe Spacer Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn alignment is required after installation\u003cstrong\u003e.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074624454898,"sku":"RTEK-100132","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29246.jpg?v=1751383021"},{"product_id":"2-front-lift-kit-spacers-fits-03-08-subaru-forester","title":"2\" Front Lift Kit Spacers - Fits 03-08 Subaru Forester","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Front Lift Kit Spacers - Fits 03-08 Subaru Forester\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch front coil spring spacers for the 03-08 Forester are one of the easiest and most economical ways to add a lift to your Forester. Our Subaru lift kit allows you to fit larger tires and increase ground clearance on your vehicle. Spacers can give stock coils added lift or can be paired with lift springs to achieve greater lift heights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese aren’t your average Subaru lift spacers. These strut spacers have some built-in advantages you don’t see anywhere else on the market. Our spring spacers have built in camber and caster correction, a benefit that allows us to lift Subaru vehicles and keep the factory alignment and suspension geometry. This complete bolt-on spacer lift kit will give you the desired aggressive look of a lifted Subaru without the hefty price tag of coilover lift kits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074624487666,"sku":"RTEK-100134","price":208.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/2in-front-lift-spacer-4.png?v=1765296275"},{"product_id":"1-1-2-front-lift-kit-spacers-fits-10-19-subaru-outback","title":"1-1\/2\" Front Lift Kit Spacers - Fits 10-19 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Front Lift Kit Spacers - Fits 10-19 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK front \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacers\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e for the 10-19 Outback are one of the easiest and most economical ways to add a lift to your Outback. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e allows you to fit larger tires and increase \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e on your vehicle. Spacers can give stock coils added lift or can be paired with \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift springs\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e to achieve greater lift heights.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese aren’t your average Subaru \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift spacers\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e. These \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacers\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e have some built-in advantages you don’t see anywhere else on the market. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espring spacers\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e have built in camber and caster correction, a benefit that allows us to lift Subaru vehicles and keep the factory alignment and suspension geometry. This complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift ki\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003et will give you the desired aggressive look of a \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e without the hefty price tag of \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoilover lift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 1-½”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074624815346,"sku":"RTEK-100135","price":198.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/2in-front-lift-spacer-4.png?v=1765296275"},{"product_id":"1-2-aluminum-spacer-lift-kit-fits-2010-2019-subaru-outback","title":"1\/2\" Aluminum Spacer Lift Kit - Fits 2010-2019 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1\/2\" Aluminum Spacer Lift Kit - Fits 2010-2019 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Front Spacers\u003c\/li\u003e\n\u003cli\u003e1\/2\" Rear Spacers\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074652012786,"sku":"RTEK-300131","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/100164.png?v=1751382915"},{"product_id":"1-aluminum-spacer-lift-kit-fits-2010-2019-subaru-outback","title":"1\" Aluminum Spacer Lift Kit - Fits 2010-2019 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 22px;\"\u003e1\" Aluminum Spacer Lift Kit - Fits 2010-2019 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThese aluminum spacers install right over your strut hat. Great for adding more lift to a vehicle's original\/aftermarket equipment or helping level out your fender gap. The aluminum lift spacer offers superior strength to our older HDPE lift spacers, giving you the most robust solution for your off-road Subaru.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\" Front Spacers\u003c\/li\u003e\n\u003cli\u003e1\" Rear Spacers\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Fit For Seamless Install\u003c\/li\u003e\n\u003cli\u003eAll Hardware Needed for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074652078322,"sku":"RTEK-300132","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/100165.png?v=1751382914"},{"product_id":"2-suspension-lift-kit-spacers-fits-19-26-subaru-ascent","title":"2\" Suspension Lift Kit Spacers - Fits 19-26 Subaru Ascent","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits 19-26 Subaru Ascent\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-end=\"592\" data-start=\"260\"\u003eThe RalliTEK 2-inch lift kit for the 2019-2026 Subaru Ascent is the perfect solution to boost your vehicle’s ground clearance. Allowing you to fit larger and more aggressive stance off-road tires. This complete suspension kit improves traction and performance on and off-road, making your Ascent adventure-ready.\u003c\/p\u003e\n\u003ch4 data-end=\"652\" data-start=\"594\"\u003eFeatures of the RalliTEK Subaru Ascent Lift Kit:\u003c\/h4\u003e\n\u003cul data-end=\"1326\" data-start=\"653\"\u003e\n\u003cli data-end=\"739\" data-start=\"653\"\u003e\n\u003cstrong data-end=\"678\" data-start=\"655\"\u003e2-Inch Lift Height:\u003c\/strong\u003e Increases ground clearance for better off-road capability.\u003c\/li\u003e\n\u003cli data-end=\"865\" data-start=\"740\"\u003e\n\u003cstrong data-end=\"784\" data-start=\"742\"\u003eBuilt-in Caster and Camber Correction:\u003c\/strong\u003e Maintains perfect alignment and factory suspension geometry, even with a lift.\u003c\/li\u003e\n\u003cli data-end=\"990\" data-start=\"866\"\u003e\n\u003cstrong data-end=\"893\" data-start=\"868\"\u003eDurable Construction:\u003c\/strong\u003e Made from 3\/16” MIG welded steel with a hammered blue powder coat for long-lasting durability.\u003c\/li\u003e\n\u003cli data-end=\"1109\" data-start=\"991\"\u003e\n\u003cstrong data-end=\"1015\" data-start=\"993\"\u003eEasy Installation:\u003c\/strong\u003e Bolt-on design fits OEM or lifted springs without dangerous strut disassembly.\u003c\/li\u003e\n\u003cli data-end=\"1239\" data-start=\"1110\"\u003e\n\u003cstrong data-end=\"1148\" data-start=\"1112\"\u003eUSA-Made with Lifetime Warranty:\u003c\/strong\u003e Engineered and manufactured in the USA, backed by a lifetime warranty for peace of mind.\u003c\/li\u003e\n\u003cli data-end=\"1326\" data-start=\"1240\"\u003e\n\u003cstrong data-end=\"1268\" data-start=\"1242\"\u003eIncludes All Hardware:\u003c\/strong\u003e Everything you need for a straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-end=\"1773\" data-start=\"1328\"\u003eWhy Choose a RalliTEK Lift Kit for Your Subaru Ascent?\u003c\/h4\u003e\n\u003cp data-end=\"1773\" data-start=\"1328\"\u003e\u003cbr data-end=\"1389\" data-start=\"1386\"\u003eOur spacer lift kit is laser cut for a precise fit and can be installed directly onto OEM struts and springs or aftermarket lifted springs. The subframe drop maintains your vehicle’s factory alignment, ensuring a smooth and safe ride. Plus, the ability to add larger off-road tires transforms your Ascent into a capable off-road machine, ready to tackle inclement terrain with ease.\u003c\/p\u003e\n\u003cp data-end=\"1773\" data-start=\"1328\"\u003eFor even better handling and enhanced off-road performance, pair our front lift spacers with RalliTEK’s high-quality springs.\u003cstrong data-end=\"1959\" data-start=\"1942\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074654896370,"sku":"RTEK-300137","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29323.jpg?v=1751382892"},{"product_id":"1-1-2-suspension-lift-kit-spacers-fits-19-26-subaru-ascent","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 19-26 Subaru Ascent","description":"\u003ch1\u003e\u003cspan style=\"font-size: 20px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 19-26 Subaru Ascent\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-start=\"260\" data-end=\"592\"\u003eThe RalliTEK 1-1\/2-inch lift kit for the 2019-2026 Subaru Ascent is the perfect solution to boost your vehicle’s ground clearance. Allowing you to fit larger and more aggressive stance off-road tires. This complete suspension kit improves traction and performance on and off-road, making your Ascent adventure-ready.\u003c\/p\u003e\n\u003ch4 data-start=\"594\" data-end=\"652\"\u003eFeatures of the RalliTEK Subaru Ascent Lift Kit:\u003c\/h4\u003e\n\u003cul data-start=\"653\" data-end=\"1326\"\u003e\n\u003cli data-start=\"653\" data-end=\"739\"\u003e\n\u003cstrong data-start=\"655\" data-end=\"678\"\u003e1-1\/2-Inch Lift Height:\u003c\/strong\u003e Increases ground clearance for better off-road capability.\u003c\/li\u003e\n\u003cli data-start=\"740\" data-end=\"865\"\u003e\n\u003cstrong data-start=\"742\" data-end=\"784\"\u003eBuilt-in Caster and Camber Correction:\u003c\/strong\u003e Maintains perfect alignment and factory suspension geometry, even with a lift.\u003c\/li\u003e\n\u003cli data-start=\"866\" data-end=\"990\"\u003e\n\u003cstrong data-start=\"868\" data-end=\"893\"\u003eDurable Construction:\u003c\/strong\u003e Made from 3\/16” MIG welded steel with a hammered blue powder coat for long-lasting durability.\u003c\/li\u003e\n\u003cli data-start=\"991\" data-end=\"1109\"\u003e\n\u003cstrong data-start=\"993\" data-end=\"1015\"\u003eEasy Installation:\u003c\/strong\u003e Bolt-on design fits OEM or lifted springs without dangerous strut disassembly.\u003c\/li\u003e\n\u003cli data-start=\"1110\" data-end=\"1239\"\u003e\n\u003cstrong data-start=\"1112\" data-end=\"1148\"\u003eUSA-Made with Lifetime Warranty:\u003c\/strong\u003e Engineered and manufactured in the USA, backed by a lifetime warranty for peace of mind.\u003c\/li\u003e\n\u003cli data-start=\"1240\" data-end=\"1326\"\u003e\n\u003cstrong data-start=\"1242\" data-end=\"1268\"\u003eIncludes All Hardware:\u003c\/strong\u003e Everything you need for a straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-start=\"1328\" data-end=\"1773\"\u003eWhy Choose a RalliTEK Lift Kit for Your Subaru Ascent?\u003c\/h4\u003e\n\u003cp data-start=\"1328\" data-end=\"1773\"\u003e\u003cbr data-start=\"1386\" data-end=\"1389\"\u003eOur spacer lift kit is laser cut for a precise fit and can be installed directly onto OEM struts and springs or aftermarket lifted springs. The subframe drop maintains your vehicle’s factory alignment, ensuring a smooth and safe ride. Plus, the ability to add larger off-road tires transforms your Ascent into a capable off-road machine, ready to tackle inclement terrain with ease.\u003c\/p\u003e\n\u003cp data-start=\"1328\" data-end=\"1773\"\u003eFor even better handling and enhanced off-road performance, pair our front lift spacers with RalliTEK’s high-quality springs.\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43326416814322,"sku":"RTEK-300133","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29324.jpg?v=1751382890"},{"product_id":"2-front-lift-kit-spacers-fits-18-24-subaru-crosstrek","title":"2\" Front Lift Kit Spacers - Fits 18-23 Subaru Crosstrek","description":"\u003ch1\u003e\n\u003cspan style=\"font-size: 24px;\"\u003e2\" Front Lift Kit Spacers - Fits \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003e18-23 \u003c\/span\u003e\u003cspan style=\"font-size: 24px;\"\u003eSubaru Crosstrek\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch front coil spring spacers for the 18-23 Crosstrek are one of the easiest and most economical ways to add a lift to your Crosstrek. Our Subaru lift kit allows you to fit larger tires and increase ground clearance on your vehicle. Spacers can give stock coils added lift or can be paired with lift springs to achieve greater lift heights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese aren’t your average Subaru lift spacers. These strut spacers have some built-in advantages you don’t see anywhere else on the market. Our spring spacers have built in camber and caster correction, a benefit that allows us to lift Subaru vehicles and keep the factory alignment and suspension geometry. This complete bolt-on spacer lift kit will give you the desired aggressive look of a lifted Subaru without the hefty price tag of coilover lift kits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074664104178,"sku":"RTEK-100263","price":219.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/2in-front-lift-spacer-4.png?v=1765296275"},{"product_id":"1-1-2-suspension-lift-kit-spacers-fits-2020-2026-subaru-outback-wilderness","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2020-2026 Subaru Outback \u0026 Wilderness","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 2020-2026 Subaru Outback \u0026amp; Wilderness\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAn alignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074671968498,"sku":"RTEK-300143","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/30058.jpg?v=1751382850"},{"product_id":"2-suspension-lift-kit-spacers-fits-20-26-subaru-outback-wilderness","title":"2\" Suspension Lift Kit Spacers - Fits 20-26 Subaru Outback \u0026 Wilderness","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits 2020-2026 Subaru Outback \u0026amp; Wilderness\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 20-26 Subaru Outback is the easiest way to lift your Outback and fit larger more aggressive off-road tires. The addition of larger tires improves performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074672230642,"sku":"RTEK-300144","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/30057.jpg?v=1751382847"},{"product_id":"2-suspension-lift-kit-spacers-fits-15-21-subaru-wrx-sti","title":"2\" Suspension Lift Kit Spacers - Fits 15-21 Subaru WRX \u0026 STI","description":"\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 15-21 Subaru WRX and STI is the easiest way to lift your WRX and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074677735666,"sku":"RTEK-300147","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29350.jpg?v=1751382839"},{"product_id":"rallitek-1-5-lift-kit-spacers-w-alignment-correction-wrx-sti-2015-2021","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2015-2021 Subaru WRX \u0026 STI","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 2015-2021 Subaru WRX \u0026amp; STI\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074677801202,"sku":"RTEK-300146","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29351.jpg?v=1751382837"},{"product_id":"1-1-2-front-lift-kit-spacers-fits-18-24-subaru-crosstrek","title":"1-1\/2\" Front Lift Kit Spacers - Fits 18-23 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Front Lift Kit Spacers - Fits 18-23 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK front spacers for the 18-23 Crosstrek are one of the easiest and most economical ways to add a lift to your Outback. Our Subaru lift kit allows you to fit larger tires and increase ground clearance on your vehicle. Spacers can give stock coils added lift or can be paired with lift springs to achieve greater lift heights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese aren’t your average Subaru lift spacers. These strut spacers have some built-in advantages you don’t see anywhere else on the market. Our spring spacers have built-in camber and caster correction, a benefit that allows us to lift Subaru vehicles and keep the factory alignment and suspension geometry. This complete bolt-on spacer lift kit will give you the desired aggressive look of a lifted Subaru without the hefty price tag of Coilover lift kits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 1-½”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074677932274,"sku":"RTEK-100262","price":208.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/2in-front-lift-spacer-4.png?v=1765296275"},{"product_id":"1-1-2-lift-kit-spacers-w-alignment-correction-fits-2014-2018-subaru-forester-xt","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 2014-2018 Subaru Forester XT","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 2014-2018 Subaru Forester XT\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074703622386,"sku":"RTEK-300152","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29356.jpg?v=1751382818"},{"product_id":"2-suspension-lift-kit-spacers-fits-14-18-subaru-forester-xt","title":"2\" Suspension Lift Kit Spacers - Fits 14-18 Subaru Forester XT","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits 14-18 Subaru Forester XT\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 14-18 Subaru Forester XT is the easiest way to lift your Forester and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074703982834,"sku":"RTEK-300153","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29357.jpg?v=1751382816"},{"product_id":"2-suspension-lift-kit-spacers-fits-17-23-subaru-impreza","title":"2\" Suspension Lift Kit Spacers - Fits 17-23 Subaru Impreza","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Suspension Lift Kit Spacers - Fits 17-23 Subaru Impreza\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK 2 inch lift kit for the 17-23 Subaru Impreza is the easiest way to lift your Impreza and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/avDOJPfDtgQ?si=FLlaZnQ2upQADOdW\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43274339877106,"sku":"RTEK-300156","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/crosstrek-lift-spacer-kit.png?v=1752000148"},{"product_id":"1-1-2-lift-kit-spacers-w-alignment-correction-fits-2017-2023-subaru-impreza","title":"1-1\/2\" Suspension Lift Kit Spacers - Fits 17-23 Subaru Impreza","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e1-1\/2\" Suspension Lift Kit Spacers - Fits 17-23 Subaru Impreza\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003e3\/16” MIG Welded Steel Construction\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAlignment Corrections Designed Into the Front Spacers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eHammered Blue Powdercoat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eMulti-Link (Rear Subframe) Spacers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eExtended Exhaust Hangers Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #339966;\"\u003e\u003cstrong\u003eAll Hardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRalliTEK's steel spacer lift kits with built-in front alignment correction are ideal for lifting your vehicle without disturbing the factory ride quality. That's right! The front spacers in this kit are offset to maintain the factory range of adjustment that the OEM camber bolt can achieve. \u003cstrong\u003eAlignment is still required after installation.\u003c\/strong\u003e Make note that the center of gravity will be raised after installation. You may want to consider pairing these spacers with a set of RalliTEK springs to improve handling both on and off the road!\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43274340073714,"sku":"RTEK-100334","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/rallitek-lift-kit-rtek-100420_52e01c0f-52ce-48ea-98fa-c1f142404ed6.jpg?v=1751382784"},{"product_id":"2-5-rear-lift-spacers-fits-2008-2026-subaru-wrx-sti-2013-2023-crosstrek","title":"2.5\" Rear Lift Spacers - Fits 2008-2026 Subaru WRX-STI\/2013-2023 Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2.5\" Rear Lift Spacers - Fits 2008-2026 Subaru WRX-STI\/2013-2026 BRZ\/2013-2023 Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp data-end=\"309\" data-start=\"125\"\u003eThese are our most aggressive rear lift spacers, engineered to correct low rear ride height on vehicles that carry a constant heavy load where overload springs alone aren’t enough.\u003c\/p\u003e\n\u003cp data-end=\"745\" data-start=\"311\"\u003eDesigned for rigs that live under weight, these spacers restore rear ride height and help maintain proper suspension geometry under sustained load conditions. A professional alignment is required after installation, and users should note that the overall center of gravity will be increased. For improved stability and handling—both on- and off-road—we strongly recommend pairing these spacers with a set of RalliTEK rear springs.\u003c\/p\u003e\n\u003ch3 data-end=\"774\" data-start=\"752\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"814\" data-start=\"777\"\u003e3\/16” MIG-welded steel construction\u003c\/li\u003e\n\u003cli data-end=\"814\" data-start=\"777\"\u003eHammered blue powder coat finish\u003c\/li\u003e\n\u003cli data-end=\"814\" data-start=\"775\"\u003e\n\u003cp data-end=\"814\" data-start=\"777\"\u003eAll required mounting hardware included\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"814\" data-start=\"777\"\u003e\u003cstrong\u003eNot recommended for use with rear lift springs unless the vehicle is carrying a constant rear overload of 500 lbs or more.\u003c\/strong\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074788163826,"sku":"RTEK-100412","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29415.jpg?v=1751382705"},{"product_id":"2-front-and-2-5-rear-suspension-lift-kit-fits-19-26-subaru-forester-wilderness","title":"2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 19-26 Subaru Forester \u0026 Wilderness","description":"\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 19-26 Subaru Forester \u0026amp; Wilderness\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis lift spacer kit is designed to alleviate rear end sag on the 19-26 Subaru Forester that are loaded with constant weight and overload springs are not enough. The RalliTEK lift kit for the Forester is the easiest way to lift your vehicle and fit larger, more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront lift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRear lift height: 2-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"No","offer_id":47270198870258,"sku":"RTEK-300183","price":819.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":47270198903026,"sku":"RTEK-300184","price":939.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/crosstrek-lift-spacer-kit.png?v=1752000148"},{"product_id":"2-front-and-2-5-rear-suspension-lift-kit-fits-15-19-subaru-outback","title":"2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 15-19 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 15-19 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis lift spacer kit is designed to alleviate rear end sag on the 15-19 Subaru Outback that are loaded with constant weight and overload springs are not enough. The RalliTEK lift kit for the Outback is the easiest way to lift your vehicle and fit larger, more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront lift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRear lift height: 2-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003eNOT RECOMMENDED FOR USE WITH 0.75\" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074790719730,"sku":"RTEK-300185","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29420.jpg?v=1751382698"},{"product_id":"2-front-and-2-5-rear-suspension-lift-kit-fits-10-14-subaru-outback","title":"2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 10-14 Subaru Outback","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 10-14 Subaru Outback\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis lift spacer kit is designed to alleviate rear end sag on the 10-14 Subaru Outback that are loaded with constant weight and overload springs are not enough. The RalliTEK lift kit for the Outback is the easiest way to lift your vehicle and fit larger, more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront lift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRear lift height: 2-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003eNOT RECOMMENDED FOR USE WITH 0.75\" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074791047410,"sku":"RTEK-300186","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29421.jpg?v=1751382696"},{"product_id":"2-front-and-2-5-rear-suspension-lift-kit-fits-15-21-subaru-wrx-sti","title":"2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 15-21 Subaru WRX\/STI","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 15-21 Subaru WRX\/STI\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis lift spacer kit is designed to alleviate rear end sag on the 15-21 Subaru WRX and STI that are loaded with constant weight and overload springs are not enough. The RalliTEK lift kit for the WRX is the easiest way to lift your vehicle and fit larger, more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront lift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRear lift height: 2-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003eNOT RECOMMENDED FOR USE WITH 0.75\" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074791112946,"sku":"RTEK-300187","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29422.jpg?v=1751382694"},{"product_id":"2-front-and-2-5-rear-suspension-lift-kit-fits-19-26-subaru-ascent","title":"2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 19-26 Subaru Ascent","description":"\u003ch1\u003e\u003cspan style=\"font-size: 18px;\"\u003e2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 19-26 Subaru Ascent\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis lift spacer kit is designed to alleviate rear end sag on the 19-26 Subaru Ascent that are loaded with constant weight and overload springs are not enough. The RalliTEK lift kit for the Ascent is the easiest way to lift your vehicle and fit larger, more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront lift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRear lift height: 2-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/avDOJPfDtgQ?si=FLlaZnQ2upQADOdW\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003eNOT RECOMMENDED FOR USE WITH 0.75\" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"No \/ No","offer_id":43326430249202,"sku":"RTEK-300188","price":699.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ No","offer_id":43326430281970,"sku":"RTEK-300190","price":895.98,"currency_code":"USD","in_stock":true},{"title":"Yes \/ Yes","offer_id":45200543318258,"sku":"RTEK-300189","price":1015.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29423.jpg?v=1751382691"},{"product_id":"2-front-2-5-rear-suspension-lift-kit-fits-20-26-subaru-outback-and-wilderness","title":"2\" Front 2.5\" Rear Suspension Lift Kit - Fits 20-26 Subaru Outback and Wilderness","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 20-26 Subaru Outback and Wilderness\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eRalliTEK lift kit for the 20-26 Subaru Outback and Wilderness is the easiest way to lift your Outback and fit larger more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe 2.5” rear spacers included in this kit are intended to correct low rear ride height on vehicles with a constant heavy load when overload springs are not enough. Our complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront lift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRear lift height: 2-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003eNOT RECOMMENDED FOR USE WITH 0.75\" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074791211250,"sku":"RTEK-300191","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29424.jpg?v=1751382688"},{"product_id":"2-front-and-2-5-rear-suspension-lift-kit-fits-17-23-subaru-impreza","title":"2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 17-23 Subaru Impreza","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 17-23 Subaru Impreza\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis lift spacer kit is designed to alleviate rear end sag on the 17-23 Subaru Impreza that are loaded with constant weight and overload springs are not enough. The RalliTEK lift kit for the Impreza is the easiest way to lift your vehicle and fit larger, more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront lift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRear lift height: 2-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e*Product Disclaimer:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eThe advertised ride height specified for this product is a measurement taken from a completely stock vehicle. Your vehicle's actual ride height after installing these springs may be more or less depending on your vehicle's trim package, add-ons, or additional modifications.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/avDOJPfDtgQ?si=FLlaZnQ2upQADOdW\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"No","offer_id":45200601088242,"sku":"RTEK-300192","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":45200601121010,"sku":"RTEK-300193","price":1019.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/files\/crosstrek-lift-spacer-kit_1.png?v=1752000056"},{"product_id":"2-front-and-2-5-rear-suspension-lift-kit-fits-14-18-subaru-forester-xt","title":"2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 14-18 Subaru Forester XT","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 14-18 Subaru Forester XT\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis lift spacer kit is designed to alleviate rear end sag on the 14-18 Subaru Forester XT that are loaded with constant weight and overload springs are not enough. The RalliTEK lift kit for the Forester is the easiest way to lift your vehicle and fit larger, more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront lift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRear lift height: 2-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074791375090,"sku":"RTEK-300194","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29426.jpg?v=1751382683"},{"product_id":"2-front-and-2-5-rear-suspension-lift-kit-fits-13-17-subaru-crosstrek","title":"2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 13-17 Subaru Crosstrek","description":"\u003ch1\u003e\u003cspan style=\"font-size: 24px;\"\u003e2\" Front and 2.5\" Rear Suspension Lift Kit - Fits 13-17 Subaru Crosstrek\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis lift spacer kit is designed to alleviate rear end sag on the 13-17 Subaru Crosstrek that are loaded with constant weight and overload springs are not enough. The RalliTEK lift kit for the Crosstrek is the easiest way to lift your vehicle and fit larger, more aggressive off-road tires. The addition of larger tires improve performance and traction on and off-road. Our \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubaru lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e increases \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eground clearance\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e, while the built in camber and caster alignment with subframe drop keep your vehicle in perfect alignment and factory geometry. After installation your \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elifted Subaru\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e will have the ability to traverse inclement terrain with ease. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOur complete bolt-on \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003espacer lift kit\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e can be easily installed on OEM struts and springs or lifted springs for a desired lift height. Each \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ecoil spring spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kit features front and rear strut spacers, laser cut for a precise fit, and powder coated hammer blue to resist the elements. In addition to being easy to install, RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003estrut spacer\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e kits omit the need for dangerous strut disassembly. RalliTEK \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003elift kits\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e are engineered and manufactured in the USA and are backed by a lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eFront lift height: 2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRear lift height: 2-1\/2”\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBuilt-in caster and camber correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory alignment specifications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRetains factory suspension geometry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16” MIG Welded Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHammered Blue Powder Coat\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBolt-on design, no drilling or cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIncreased ground clearance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAbility to fit larger off-road tires\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eManufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eLifetime warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Hardware Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWant an even better ride? Pair our front lift spacers with our \u003c\/span\u003e\u003ca href=\"https:\/\/rallitek.com\/collections\/lift-springs\"\u003e\u003cspan style=\"font-weight: 400;\"\u003esprings\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e for even better handling and off-road capability. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eGive us a call at 503-619-0055 or get in touch via live chat if we can answer more questions for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d0121a;\"\u003eNOT RECOMMENDED FOR USE WITH 0.75\" OR 1” REAR LIFT SPRINGS UNLESS RUNNING A CONSTANT HEAVY OVERLOAD OF 500+LBS (MAY PROVIDE MORE LIFT THAN SUBFRAME SPACERS CAN CORRECT FOR)\u003c\/span\u003e\u003c\/p\u003e","brand":"RalliTEK","offers":[{"title":"Default Title","offer_id":43074791538930,"sku":"RTEK-300195","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/products\/29427.jpg?v=1751382681"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/1726\/7954\/collections\/crosstrek-lift-spacer-kit_1.png?v=1754947465","url":"https:\/\/rallitek.com\/en-ca\/collections\/lift-spacer-kits-1\/subaru-forester-2002.oembed","provider":"RalliTEK","version":"1.0","type":"link"}